Log:
Scaricare : 20   File Size : 6 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni

Scaricare : 19   File Size : 6 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni

Scaricare : 11   File Size : 6 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni

Scaricare : 5   File Size : 464 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

011 Four-level scrambled ones. Transmits a scrambled, constant high logic level as a four- level (2B1Q) signal. Feedback polynomial determined by the htur_lfsr control bit. 100 Reserved. 101 Four-level scrambled data. Scrambles and transmits the four-level (2B1Q) sign and magnitude bits from the channel unit transmit interface. Feedback polynomial determined by the htur_lfsr control bit. 110 Two-level unscrambled data. Constantly forces the magnitude bit from the channel unit transmit interface

Scaricare : 130   File Size : 1 mb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

Correct the set mode settings after resetting: -Optional filter settings (p. 55) Initial settings After resetting the transceiver, set controls and switches as shown in the figure below. [POWER] [F-INP] [M-CL] Under cooler temperatures, the LCD may appear dark and unstable after turning power ON. This is normal and does not indicate any equipment malfunction. CW : Max. clockwise [METER]: Po [ANT]: 1 [ATT]: OFF [PRE]: OFF [TWIN PBT]: Center [APF], [AUTO NOTCH]: OFF [LOCK]: OFF[AGC]: MID [POWER]:

Scaricare : 79   File Size : 733 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

EXPLICIT DEFINITIONS WORD DEFINITION RWARNING Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries. SmarTrunk II™ is a trademark of the SmarTrunk Systems, Inc. PRECAUTION RWARNING! NEVER

Scaricare : 30   File Size : 803 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

• IC-F14/F24 : Rotate the channel selector to select the pre-programmed memory channels. w VOLUME CONTROL [VOL] Rotate to turn the power ON/OFF and adjust the audio level. PANEL DESCRIPTION 2 e LED INDICATOR (p. 8) . Lights red while transmitting. . Lights green while receiving open. . Lights/blinks orange when the according to the pre-programming. r SPEAKER-MICROPHONE CONNECTOR [SP MIC] Connects the optional speaker-microphone. [SP MIC] jack cover NOTE: Attach the [SP MIC] jack cover when the o

Scaricare : 18   File Size : 733 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

BANK-TYPE: Push [BANK] to select the desired bank number or name. AUTOMATIC SCAN TYPE: Channel setting is not necessary for this type. When turning the power ON, the transceiver automatically starts scanning. Scanning stops when receiving a call or when taking the microphone off hook. Receiving and RECEIVING: q Push [ ] to turn the power ON. w Push [ ] and [ ] to select a channel. e When receiving a call, adjust the audio comfortable listening level. TRANSMITTING: r Take the microphone off hook

Scaricare : 8   File Size : 803 kb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

• Ask your dealer for the output power level for each selection. TALK AROUND KEY . Push to turn the talk around function OFF. . Push and hold to turn the talk around function ON. • The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. WIDE/NARROW KEY . Push to select the IF bandwidth to wide. • The wide passband width can be selected from 25.0 or 20.0 kHz using the CS-F14 CLONING SOFTWARE. (PMR operation only) Ask your de

Scaricare : 6   File Size : 4 mb   Produttore : Icom  
Categoria : Attrezzature per imbarcazioni
@name

The amplitude-limited MIC signals are output from pin 5, then applied to the base band IC (IC5, pin 3). The applied MIC signals are amplified at the amplifier (TXA1), and level adjusted at the volume controller (VR1). The level adjusted MIC signals are applied or bypassed the compressor section, pre-emphasis section, TX/RX HPF, de-scrambler, limiter, splatter, in sequence, then applied to another volume controller. The compressor compresses the MIC signals to provide high S/N ratio for receive





categorie