valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
Use the vocal fader function for ordinary discs or tapes. Use the multiplex function for multi audio discs or tapes. Press KARAOKE repeatedly to select the vocal fader or multiplex function. Each time KARAOKE is pressed, one of these functions is selected cyclically. @ Vocal Fader The singer’s voice becomes softer than the accompaniment. @ Multiplex The sound on the left channel is heard from both speakers and the sound on the right channel is muted. To hear the sound on the right channel, see below. @ Cancel To change the audible channel in Multiplex function When Multiplex is selected, “MPX -L” is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, kee~ txessing KARAOKE until “MPXR“ is displayed. To return to the initial setting, select MPX-L. When the power is turned off, MPX-L is restored. m The Karaoke functions may not operate correctly with the following kinds of CDs or tapes. -Those with monaural sound -Those recorded with strong echoes -Those with the vocal part recorded on the right or left side of the sound width . While the Karaoke function is on, the sound is output as monaural. When the function is changed, the Karaoke function is canceled. 22 ENGLISH Before or during CD play, you can reserve up to 15 tracks to be played after the current track. Each reservation is cleared when it finishes playing. Use the remote control. 7 Press CD and load the discs. 2 Press PRGM once. — 3 Press DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc. Then, press numbered buttons O-9 and + 10 to program a track, Reserved disc number Reserved track number 4 Repeat step 3 to reserve other tracks. 5 Press F to start play. After a track is played, it is cleared from the program. Disc number of Currently the last Number of remaining playing disc reservation reserved tracks Track number of Currently playing the last reservation track number flashes. ,e@. To add a reservation during play .:: i Repeat step 3. a @ii ;-,,, :4: To check the reserved tracks Press CD EDITICHECK repeatedly. Each time it is pressed, the $-@ !! disc number and track number are displayed in the reserved %# order. To stop play Press n . When E is pressed, the play starts from the last track again. To skip a current track Press ~. The skipped track is cleared from the program. To clear all the reservations Press > repeatedly until “K -POO is displayed. Press it once more to cancel the Karaoke programs. The display returns to that of CD play. m QIf the reserved track number does not exist on the selected disc, the unit stops playing and the display flashes. In this case, press -to skip the error track. Then press ~ to start play with the next reserved track. When PRGM is Dressed re~eatedlv in ste~ 2, “PRGM” is displayed and the unit enters CD program play ‘mode (page 15). To cancel program play, press 9 CLEAR. m ENGLISH 23 The clock is displayed. (The “:” between the hours and minutes flashes.) When the power cord is plugged into an AC outlet for the first time after purchase or when the clock setting is canceled due to a power failure, the entire clock display flashes. 1 Press CLOCK. 2 Within 4 seconds, turn MULTI JOG to designate the hour and the minute. Turning MULTI JOG changes both the hour and the minute. + or * is also available instead of MULTI JOG. Holding j these buttons down will vary the time rapidly. 3 Press ENTER or Il. The clock starts from 00 seconds. To restore an original clock setting Press CLOCK before completing step 3 to restore the previous time setting. This cancels any new setting. To view the clock when another display is in the display Press CLOCK. The time is displayed for 4 seconds and then the original display reappears. However, the clock cannot be displayed during recording. To switch to the 24-hour standard Press the CLOCK and then press n within 4 seconds. Repeat the same procedure to restore the 12-hour standard. If the clock display flashes If the display flashes when the clock is displayed, it indicates that the clock has stopped due to a power failure or the removal of the power cord. The current time needs to be reset. m If the power-economizing mode (page 9) is on, all the display lights turn off when the power is turned off. To view the clock, press CLOCK so that the time is displayed for 4 seconds. The unit can be turned off automatically at a specified time. Use the remote control. 1 Press SLEEP. 2 Within 4 seconds, turn MULTI JOG to specify the time until the power is turned off. The time changes between 5 and 240 minutes in 5-minute steps. +4 and > are also available instead of MULTI JOG. Specified time While the timer is in operation, the display indication is dimmer than usual. To check the time remaining until the power is turned off Press SLEEP once. The remaining time is displayed for 4 seconds. To cancel the sleep timer Press SLEEP twice so that “SLEEP oFP appears on the display. 24 ENGLISH 5 Adjust the vo...
Questo manuale è adatto anche per i modelli :Ricevitori - CX NMA545 (12.95 mb)