valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM 3. Select the track you want by pressing SKIP/SEARCH or . The track number you selected appears on the display. 4. Press PROGRAM. The selected track is stored, and the next program number appears on the display. 5. Repeat Steps 3 and 4 to store up to 16 tracks. Notes: • You can store the same track more than once. • When 16 tracks are programmed, C -01 and the first track’s number appear on the display. 6. To complete programming and play the programmed sequence, press PLAY/PAUSE . The CD player begins playing the first track of the programmed sequence. The display shows the play indicator, the current track number, and the current track’s elapsed playing time. Notes: • Programming is not completed until you press PLAY/PAUSE . • To repeat, skip over, or search for tracks, see “Special CD Player Features.” Checking a Programmed Sequence To check the programmed sequence, while the CD is stopped, repeatedly press PROGRAM. The display shows each stored track number. Erasing a Programmed Sequence Any of the following will erase a programmed sequence: PROGRAM •Press STOP/CLEAR until clears from the display and the CD’s total number of tracks and playing time appear. •Press STOP/CLEAR . Then press PUSH OPEN after the CD stops turning. •Set FUNCTION to another position. • Disconnect the power source. 13 14-543.fm Page 14 Wednesday, June 30, 1999 3:52 PM SPECIAL CD PLAYER FEATURES Automatic Search Music System (ASMS) You can use ASMS to search through the CD to select a desired track or programmed sequence. To select a track during play: • Press and release SKIP/SEARCH to return to the beginning of the current track. • Press and release SKIP/SEARCH to skip forward to the beginning of the next track. • Repeatedly press SKIP/SEARCH or to skip backward or forward through additional tracks. Notes: • If you repeatedly press SKIP/ SEARCH while the first track is playing, the last track begins playing. • If you repeatedly press SKIP/ SEARCH while the last track is playing, the CD-3319 skips the 14 rest of the last track and begins playing the first track. To select a track while the CD player is stopped or during pause, press SKIP/SEARCH or until the desired track number appears on the display. Then press PLAY/PAUSE to play the track. Audible Search While playing any track on a CD, you can press and hold down SKIP/ SEARCH or to search through the track to find a desired section. You hear the music at a higher speed and lower volume while the CD player searches. • Press and hold down SKIP/ SEARCH for forward search. • Press and hold down SKIP/ SEARCH for reverse search. To resume normal play, release SKIP/ SEARCH . or 14-543.fm Page 15 Wednesday, June 30, 1999 3:52 PM Repeat Play You can repeat a single track, the entire CD, or a programmed sequence. • To repeat a single track, press MODE before or during play. REPEAT appears on the display and the CD player repeatedly plays the selected track. • To repeat the entire CD, press MODE twice before or during play. REPEAT ALL appears on the display, and the CD player repeatedly plays the entire CD. • To repeat a programmed sequence, press MODE twice before or during programmed play. PROGRAM REPEAT ALL and appear on the display and the CD player repeatedly plays the programmed sequence. To cancel repeat play at any time, press MODE until REPEAT REPEAT ALL or disappears from the display. Intro Play During intro play, the CD player scans through all the CD’s tracks, playing the first 10 seconds of each track. Note: Intro play does not work with a programmed sequence. While the CD player is stopped, press MODE until INTRO appears on the display. Then press PLAY/PAUSE . The CD player plays the first 10 seconds of each track. After it plays the first 10 seconds of the last track during intro play, the CD player stops playing and the display shows the total number of tracks and the total playing time. During intro play, if you want to listen to a specific track within 10 seconds after it begins playing, press PLAY/ PAUSE again to turn off intro play and resume normal play. Shuffle Play During shuffle play, the CD player plays all the tracks on a CD once, selecting them in random order. Notes: • None of the tracks are played more than once. • Shuffle play does not work with a programmed sequence or repeat play. 15 14-543.fm Page 16 Wednesday, June 30, 1999 3:52 PM • You must select shuffle play before playback. If you select shuffle play while a CD is playing, SHUFFLE appears on the display but the function does not work. SHUFFLE Before play, press MODE until appears on the display. Then press PLAY/PAUSE . The CD player selects and plays each of the tracks randomly. After all of the tracks have played once, the CD player automatically stops. CD CARE TIPS Even though a compact disc is very durable, treat the CD surface with care. We recommend the following precautions: • Do not place anything but a CD in the disc tray. This can damage th...
Questo manuale è adatto anche per i modelli :Ricevitori - CD-3319 (212.53 kb)