valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
Do not use tapes that do not have the mark. • Three different tape widths are available: 1/4" (6 mm), 3/8" (9 mm) and 1/2" (12 mm). • Do not pull the tape. This may damage the tape cassettes. • Do not attempt to cut the tape while printing or feeding since this will damage the tape. • Do not clean the machine with alcohol or other organic solvents. Use only a soft, dry cloth. • Remove the batteries if you do not intend to use your machine for an extended period of time. (Note: When power is disconnected for more than three minutes, any messages in the working area or the Phrase Memory will be lost.) • Do not put any foreign objects onto or into the machine. • Do not expose the machine to high temperatures or high humidity. Never leave it on the dashboard or in the back of your car. • Do not use the machine in dusty places. Keep it out of both direct sunlight and rain. • Do not leave any rubber or vinyl on the machine for an extended period of time. Doing so may cause staining. • After inserting a new tape cassette, advance the tape by holding down and pressing once. • Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g. a cotton swab) to avoid permanent damage. • To avoid injuries, do not touch the cutter’s edge. POWER SUPPLY Since this machine is compact and portable, it can be used anywhere by installing six AAA alkaline batteries (LR03). When changing the batteries, always replace all six at the same time. (1) Press in on the rough area at the top end of the machine and pull off the back cover. At the same time, the cassette release lever on the back of the machine is lifted. (2) Insert the batteries in the direction shown by the illustration on the bottom of the battery compartment. The positive end of the three batteries in the bottom row point toward the right, while the positive end of the top three point in the opposite direction. Note: When replacing the batteries, insert the new ones within three minutes of removing the old ones, otherwise any message in the working area or Phrase Memory will be lost . (3) Replace the back cover by inserting the tab on the bottom end of the cover into the slot on the bottom end of the machine, then securely fitting it into place. Lock the back cover by pushing the release lever back into place. – + + – – + + – OVERVIEW TAPE CASSETTES A TZ tape cassette is supplied with this unit. The Brother TZ tapes used in this machine are available in a variety of colors and three tape widths (1/4" (6 mm), 3/8" (9 mm), and 1/2" (12 mm)). (1) Press in on the rough area at the top end of the machine and pull off the back cover. At the same time, the cassette release lever on the back of the machine is lifted. (2) If there is a tape cassette already in the compartment, remove it by pulling it straight up. (3) Remove the stopper from the new tape cassette and if the tape inside the cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the tape cassette. Note: Some tape cassettes are not provided with a stopper. (4) Insert the tape cassette firmly into the compartment. Note: When inserting the tape cassette, make sure that the inner ribbon does not get caught on the corner of the metal guide. (5) Replace the back cover by inserting the tab on the bottom end of the cover into the slot on the bottom end of the machine, then securely fitting it into place. Lock the back cover by pushing the release lever back into place. (6) Feed the tape by holding down and pressing once, then press in on the tape cutter button to cut the tape. 2 1 3 4 STARTING Press . The machine’s internal memory retains the last message created and displays it when you turn on the machine. This feature allows you to stop work on a message, turn off the machine and return to it later without having to re-enter the message. The machine has an automatic power-off feature. If no key is pressed within five minutes while the machine is on, it will automatically turn off. The message will be retained in memory until the machine is turned on again. CODE KEY By holding down and pressing a key with a function, written in yellow above it, you can use the corresponding function or add the corresponding character to your message. CAPS KEY By pressing to enter Caps mode, you can add uppercase letters to your message by simply pressing the character keys. When this mode is on, the Caps indicator in the bottom left-hand corner of the display comes on. To exit Caps mode, press to turn off the Caps indicator. DISPLAY This machine’s LCD display is 4 characters wide. Actually though, you can create messages up to 55 characters in length. The 4-character display is like a window which moves across your message. 1234567890123456789012345678901234567890123456789012345 CURSOR MOVEMENT You can review and edit different parts of your message by moving the cursor backward and forward. Press and to move the cursor one space at a time. Note: • Hold do...