valutazioni - 3, GPA: 4 ( )

Produttore : Sony File Size : 424.77 kb File Nome : Lingua di insegnamento:

To prevent this from happening, the use of a good quality “wet type” cassette head and capstan cleaner is recommended every 10 hours of use. FAILURE TO CLEAN THE TAPE DECK AT REASONABLE INTERVALS WILL RESULT IN TAPE DECK SERVICE THAT IS NOT COVERED BY WARRANTY. How to Listen to a Tape 1. Turn the vehicles ignition key to the ON or ACC position to provide power to the radio. 2. Rotate knob (1) clockwise to turn on the unit. Adjust the volume knob (1) to a low listening level. 3. Insert a cassette tape into the the cassette opening (10) with the thick side pointing toward the right Note: The cassette tape will only fit in one direction. If the tape does not insert easily, DO NOT FORCE IT. Turn the tape over and reinsert it. At this time the display (9) will be showing the tape play indicators (9e) 4. Adjust the volume, bass and treble controls to suit your taste. Changing the Tape Program Cassette tapes have two playing sides, side (A) and side (B). The cassette player in this unit will play either side of the tape. If you wish to change play from side (A) to side (B) or vise versa, press and release the FF and REW buttons at the same time. The tape play indicator (9E) will show the new direction and the tape will begin to play. Note: If the tape is allowed to run to the end of the side that is playing , it will automatically change over to the remining side and play. Cassette Operation Programming Using the Fast Forward and Rewind Controls The two buttons located to the right side of the tape opening (10) are the fast forward and rewind buttons (11). While the tape is playing you can use these buttons to fast advance the tape to search for special sound tracks or rewind the tape to listen to it from the beginning. To operate these buttons, simply press one or the other in until it locks. To release it, press the opposite button slightly. The “FF” button will always fast advance the tape forward and the “REW”button Programming the Radio Station Recall Buttons 1. Rotate knob (1) clockwise to turn on the unit. Adjust the volume knob (1) to a low listening level. 2. Use the band button (4) to select the AM or FM radio band you want to memorize a radio station. The FM band has 3 banks (FM 1, 2, and 3). The AM band has 2 banks (AM 1 and 2). Continue pressing the band button (4) until the desired radio band is displayed (9a). 3. Use the tuning button (5) to select a desired radio station. Press the will always fast rewind the tape. “ < ”(up) button to tune to higher radios stations. Use the “” < (down) button to tune to lower radio sta- Listing to the Radio Tuner While Fast Advancing the Tape To listen to the AM/FM radio while tions. Pressing and releasing the tuning control buttons (5) will the tape is rewinding or fast forwarding, press the “R.FREQ”button after the FF or REW button is pushed. This will turn on the radio tuner until the FF or REW button is released and the tape begins to play again. Once this feature is turned on, each time the “FF and “REW”buttons are pushed, the radio tuner will come on automatically. If you want to turn this feature off, press the ‘R.FREQ”button while the tape is fast forwarding or rewinding. The tuner will be off. cause the tuner to move up or down two decimal increments. Pressing and holding the up or down tuning buttons (5) will cause the tuner to count up or down at high speed. 4. Once the desired station is selected, press and hold down one of the 5 station recall buttons (13) until the channel indicator (9d) is displayed, release the button. The station is now memorized to the band indicated (9a) and the recall button indicated (9d). Repeat procedures 2 thru 4 for all 5 preset buttons. 5. Select another r...

Scarica la tua

Per scaricare, digitare 2 cifre :