valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
3 Switching settings Press either the AM button or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. 1 Select the band for auto memory entry. 2 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 3 Press the . button repeatedly until "A-MEMORY" appears in the display. Press the 4 button to search in the other direction. 4 Hold down either the AM button or FM button for two seconds or more to start auto memory function. The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. — 12 — Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. NOTE • When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. • When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. • When the Traffic Information function is on , only the local traffic information station frequency will be stored. Cancelling Auto Memory Entry During Its Operation: Press the MENU button whilst auto memory entry is taking place to stop the process. Function of remote control with number/letter entry buttons (See page 8) Direct Access Tuning When you already know the frequency of the station that you want to listen to, you can enter it directly for quick access. (Function of remote control) 1 Select the band by pressing the FM or AM button. 2 Press the DIRECT button. The frequency part of the display blinks for 10 seconds. If you make no input in the 10-second period, direct access tuning is automatically cancelled. 3 Enter the frequency of the desired station whilst the display is blinking. If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1. If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0. NOTE • When a frequency which cannot be received is input, this frequency is not verified and operation returns to the original frequency input mode. • FM frequencies can only be input in 0.1 MHz steps, and not in 0.01 steps. Cancelling Direct Access Tuning: Press the DIRECT button again. Switching Display for Tuner (non-RDS station) Switching the Display: Each time you press the DISP button, the display switches between the frequency and Clock. NOTE • When the switching clock display (P.31) is set to off, the display will not switch to the clock display. • The .indicator lights whilst the clock is displayed. — 13 — English Tuner features (See page 5) Function of remote control with DNPP button (See page 8) Preset station seek with Programme service name You can search for the preset station with Programme Service name. 1 Press the DNPP button on the remote control. “SNP PLAY” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened to are displayed for 5 seconds each. The display band switches in the following order: = FM1 i FM2 i FM3 i AM + Each time you press the . button, the station display switches in the forward direction. Each time you press the 4 button, the station display switches in the reverse direction. Stations which have no names will be displayed as frequencies. NOTE Changing the Displayed Band Pressing the FM button switches between the FM1, FM2, FM3 and AM displays, in that order. Pressing the AM button switches between the displays in the reverse direction. 2 Once the name is displayed for the station you want to listen to Press the OK button. Reception starts of the displayed station, and the seek mode ends. Cancelling mode during input: Press the DNPP button. The seek mode is cancelled. RDS features (See page 6) RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you...
Questo manuale è adatto anche per i modelli :Ricevitori - KRC-559R (408.27 kb)