valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
Press ► PLAY to start play. Reference Press SE33/OFF, then ► PLAY to switch from listening to a CD or the radio. Adjust the volume. To stop play: Press m/± STOP/EJECT. To stop play temporarily: Press II PAUSE. To resume play: Press II PAUSE again. The unit's power is on in the pause mode. Stop tape and turn the unit off by pressing l/± STOP/EJECT when leaving the unit. To fast-forward or rewind the tape Q Press « REW/REV or ►► FF/CUE in the stop mode. To rewind To fast-forward ■« REW/REV ►► FF/CUE Do not press ►PLAY when rewinding or fast forwarding, as this may jam the tape. Be sure to press l/± STOP/EJECT before the next operation. To find a particular spot on a tape Q Press « REW/REV or FF/CUE during playback. Tape play is resumed when the button is released. To search backward To search forward REW/REV ►► FF/CUE Full auto-stop: The automatic stop system will release the buttons when the tape reaches the end during play or when recording, fast forwarding or rewinding. о ХВ5 ьдаичтая Вэтея OQQ SLEEP - VOLUME + ООО Panasonic CD ПЛОЮ CASSETTE H xbs swmwjsn Кто o cq_o SLEEP “ VOLUME + ООО Panasonic CD RADIO CASSETTE Changing the sound quality Blaster When the POWER BLASTER is on, the level of the sound is boosted. Press POWER BLASTER. POWER BLASTER indicator lights when this function is activated. To cancel POWER BLASTER function: Press POWER BLASTER to turn the indicator off. To resume Power Blaster, press the button again. • When listening through headphones Turning Power Blaster on heighten the volume. Take care not to damage your hearing. • Turning Power Blaster on/off will not affect the recording. (>XBS) □ by remote control only When the XBS level control is adjusted, the level of the dynamic low frequency sound range is boosted. Press XBS. Every time you press the button: XBS <-* XBS OFF В by remote control only The “live” effect allows enjoyment of the 3-D feeling of listening to live music. Compared with earlier surround sound systems, the sound virtualizer leaves mlddle-range sounds such as vocals clear and gives natural width and depth to music. Sound virtualizer is only effective with stereo sound. Press S.VIRTUALIZER to display the sound virtualizer indicator. To cancel: Press S.VIRTUALIZER to clear the sound virtualizer indicator. • When listening through headphones The effect is less discemable than through the unit speakers. • When excessive interference in FM stereo reception occurs If interference increases, cancel the sound virtualizer effect. ■ 13 Listening operations Leader tape (Recording cannot be made.) Before recording To take up the leader tape: □ Only normal tapes can be used. The sound may not be recorded properly if high position tapes and metal position tapes are used with this unit. References • Any changes made to the volume or sound quality during recording will not affect the recording. • In order to prevent trouble caused by flat batteries, it is recommended that you either supply power to the unit from the household AC outlet or replace ail the batteries with new ones when you are recording something which is important to you. • The recording level is set automatically. n If the unit is brought near a TV set during recording, noise may be recorded due to the effects of the signals from the TV set. Maintain a distance of at least 1.5 meters between the unit and a TV set. To make a blank tape: 1. Load the recorded tape with the side to be erased facing upward. 2. Press SZEa/OFF. 3. Press • (RECl- ► PLAY is also depressed with 9 (RECl. Recording from radio broadcasts 13 FI Press H/± STOP/EJECT and load the tape. Load the tape with the side to be recorded facing upward. HTune in the broadcast station. (See page 9.) □ Press • (REC) to start recording. ► PLAY is also depressed with • (RECl. To stop the recording: Press U/± STOP/EJECT. To stop the recording temporarily: Press II PAUSE. To resume recording, press II PAUSE again. To reduce noise while recording an AM broadcast (Beat proof function): H Press FM MODE/BP when recording or in the recording standby mode. Each time you press the button, "bPl" and "bP2" will be displayed alternately. Select the position with the least noise. Recording from CDs □ n Press ■/— STOP/EJECT and load the tape. Load the tape with the side to be recorded facing upward. Press ± CD OPEN and insert the CD. El Press (33, then press ■ CLEAR after the track number has been displayed. The total number of tracks and total play time of the CD are displayed. □ Press • IREC) to start recording. ► PLAY is also depressed with 9 (RECl. CD play starts simultaneously. To stop the recording: Press ■ CLEAR and B/± STOP/EJECT. Recording favourite tracks Program desired tracks (refer to steps 2 to 4 on page 11) after step 3. SLEEP fillin'' U. D.fJL) B Using the sleep timer (Available only when you are listening to the radio or a CD) This timer tu...