valutazioni - 5, GPA: 4 ( )

Produttore : Panasonic File Size : 297.85 kb File Nome : RXFT530.PDF Lingua di insegnamento:

Connect the headphones to the headphones jack. •Avoid listening for prolonged periods ot time to prevent hearing damage. •Speakers are automatically cut off when the headphones are connected. @ Deck 2 (For recording and playback) Pause button (II PAUSE) Stop/eject button ( Q STOP/EJECT) Fast forward/cue button (44/CUE) Rewind/review button (►►/REV) Playback button (< PLAY) Record button (•BOSSES) 0 Band selector (BAND) (g) Tuning control (TUNING) @ Deck 1 cassette compartment @ Deck 2 cassette compartment ® Speakers (Woofer) ® Speakers (Tweeter) © Handle ® Telescopic antenna © Battery compartment © AC socket (AC IN—■) L (White) 5 Listening to Tapes You can use normal tapes only. You can use either deck 1 or deck 2 for tape playback by following the same steps. (This page shows an example using deck 2.) Single tape playback El 1 iMua «J Qm □ STOMEJECT 2 □ Set SELECTOR to TAPE/0D. Press STOP/EJECT, and then insert the tape. Insert the cassette with the exposed tape facing up. Playback side LAY Press PLAY to start playback. n VOLUME TONE Adjust VOLUME and TONE. To stop the playback: Press STOP/EJECT. To briefly interrupt the playback: Press PAUSE. To resume playback, press PAUSE again. Full auto stop: When the tape reaches the end, the tape will automatically stop. To fast forward or rewind the tape ED Press <4<4/CUE or ►►/REV while the tape is stopped. The tape will start moving at high speed. To stop the fast forward or rewind operation, press STOP/ EJECT. To cue or review the tape ED During playback, press and hold -4^/CUE or ►►/REV. The recorded sound on the tape can be monitored at high speed. When the button is released, normal playback will resume. 6 Automatic playback relay (deck 1 to deck 2) B When deck 1 playback has finished, deck 2 playback starts automatically. Insert the playback tapes into deck 1 and deck 2. Playback side Press PLAY of deck 1. IIPMJSt ^ Press PAUSE of deck 2, then Press PAUS □ □ press PLAY. 7 Listening to Radio Broadcasts Refer to El • 2 11 SEL^°" |, Set SELECTOR to RADIO. wiQ Im 0ÜÜ E Set BAND to the desired radio band. FM STEREO: To receive FM stereo broadcasts (If you have tuned into an FM stereo broadcast, the FM ST indicator will light.) AM: To receive AM broad- casts •If FM stereo reception is poor, set BAND to FM. This will reduce the noise and provide clear reception; however, the broadcast will not be heard in stereo. 3 tuhmg ^ use TUNING to tune into a de-(iiiimiiiiil) sjrecj broadcast. Adjust VOLUME and TONE. The radio can be turned off by setting SELECTOR to TAPE/ Adjust the antennas El FM: Pull out the telescopic antenna and adjust its length and angle for optimum reception. AM: Turn the unit in the direction which gives the best results. Making a Recording (deck 2 only) You can use normal tapes only. The recording level is automatically adjusted. Recording from radio broadcasts El □ #□33333 3 □ Press STOP/EJECT of deck 2 to insert the tape. ■Recording side Tune into the desired broadcast. (Follow the procedure 1-4 of “Listening to Radio Broadcasts".) Press laMMaa. When recording AM broadcasts: B.P selector can reduce unwanted beat signals (whistle) which sometimes occur. Set B.P to the position which gives best results. To stop the recording: Press STOP/EJECT. To briefly interrupt recording: Press PAUSE. To resume recording, press PAUSE again. Recording through the built-in microphone ID T««tB w Su* 1_I_I Set SELECTOR to TAPE/SS3. Set EDITING to MIC. osTowjECT »uiwuw insert the tape into deck 2, and 3OST0WJECT »la«»«™ insert the tape □ □ press ESS¡EE. Pause button: Before beginning a recording, first press and lock PAUSE. Then press iswmsm . (The tape will not move.) When ready to record, press PAUSE to release it. This will start tape movement for immediate recording. Do not use PAUSE to stop the tape for a long period of time. Monitoring: The monitor system enables you to listen, through the speakers or headphones, to the sound as it is being recorded. When recording from the built-in microphone the sound being recorded cannot be monitored. 9 Making a Recording (continued) Recording from deck 1 to deck 2 H When PAUSE and istamsw of deck 2 are pressed, tape recording starts by pressing the deck 1 playback button. (Synchro-start function) 7 t "llfTI Set SELECTOR to TAPE/Saa. 2 3 Insert the playback tape into deck 1 and the recording tape into deck 2. | j—j|[ \ | Set EDITING to the desired posi--111—- tion. IMGfl NO*HAUl i,WI " "NORMAL”: Normal speed "HIGH": High speed iipause »etheid Press PAUSE of deck 2, then | [ | | press iHMMilD. 0»LAY □ Press PLAY of deck 1. Recording is started by means of the Synchro-start function. To stop recording: Press STOP/EJECT (deck 1 and deck 2). • Do not change the tape speed during recording. The playback sound may flutter. • Be sure to set SELECTOR to TAPE/ SH3 during recording. Do not change it to any other...

Scarica la tua

Per scaricare, digitare 2 cifre :