valutazioni - 4, GPA: 4 ( )

Produttore : Clarion File Size : 1.02 mb File Nome : RAX331D(Manual),4.pdf Lingua di insegnamento:

standard frequencies: 1) Set the tuner mode. 2) While pressing the BAND button IJU. press the function button 2 QT|- 3) Release the buttons. Your car stereo will once again be calibrated to receive standard U.S. transmissions. The chart below lists the frequency specifications for the U.S. and other countries. Inltal Setting (U S standard) New Setting (outside U.S.) Frequency spacing 10 kHz 9 kHz AM Frequency range 530 to 1710 kHz 531 to 1629 kHz FM Frequency spacing 200 kHz 50 kHz Frequency range 87.9 to 107.9 MHz 87.5 to 108 MHz CD Changer Operation_ When a separately sold CD changer (CDC635/ CDC1235) is connected, it can be controlled from the RAX331D (RAX330F). CD-ROMs cannot be played. Listening to the Disc Press the FUNC button [6] to select the CD changer mode, then the CD starts playing. Stopping (pausing) Playback Press the Play/Pause button 01. Press the Play/Pause button 08) again to resume playback. Selection of CDs Press the Disc Up button 01 or the Disc Down button [19], then select the CD you wish to play. D-UP: Every time you press the button, the CDs will be selected as: 1-»2-»3-*4-*5-»6-» 1... D-DOWN: Every time you press the button, the CDs will be selected as: 1-*6-»5-*4-»3-»2-» 1..... Scan Play (Intro Music Scan) Press the SCN button ¡31, then the display shows “SCN,' then the CD will play the first 10 seconds of each track of the whole disc. Press the SCN button 0 again to disengage the unit from scan play * A scan play will start from the track following the one currently playing Repeat Play Press the RPT button 01, then the display shows "RPT," then the track currently playing will be played repeatedly. Press the RPT button 01 again to disengage the unit from repeat play. Selecting Tracks (songs) Press the Left and Right buttons [9]. ►>: Playback will start from the next track. <4: Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play the previous track. Fast-Forward and Fast-Backward Press and hold the Left and Right buttons [9]. ►>: To fast-forward <4 : To fast-backward * Pressing the Left and Right button lor 1 second or longer will move forward or backward 5 times taster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. 6. OPERATION Note: • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (untold). Basic Operation_ A CAUTION When this unit is turned on, starting ana stopping the engine of a car wtth Its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume. 1) Press the POWER button [6]. * To turn the power of), press the POWER button lor al least 1 second. 2) Press the FUNC button [6] to select another operation mode. The mode switches as follows each time the FUNC button is pressed: Radio -* Tape -* CD changer -* Radio * It a component is not connected, that operation mode cannot be selected. * 'CASS" appears when no tape is loaded in Ihe RAX331D (RAX330F). and "DISC" appears when no disc is loaded in the CD changer. 3) Use the Up and Down buttons [8] to adjust the volume. ▲: Increases the volume. T: Decreases the volume. Audio Mode Adjustments 1) Press the A-M button [7] to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS/TREB -♦ BAL/FAD -* Previous mode 2) Use the Left and Right and the Up and Down buttons [8], 00 to adjust the bass and treble. ►>: Bass gets stronger. «: Bass gets weaker A: Treble gets stronger. ▼: Treble gets weaker. 3) Use the Left and Right and the Up and Down buttons H], [9] to adjust the balance and fader. «Adjusting the balance> ►>: Sound from right speakers gets stronger. «: Sound from left speakers gets stronger. «Adjusting the fader> ▲ : Sound from front speakers gets stronger. ▼: Sound from rear speakers gets stronger. Loudness Function Press and hold the LOUD button [7] for at least 2 seconds to turn the loudness function on and off. Switching the Display The display changes as follows each time the DISP button @ is pressed: Main display -* Clock display •+ Main display Setting the Clock 1) While pressing the BAND button 6*I, press the DISP button SZl to enter the clock display mode. 2) While pressing the BAND button 5U, press and hold the DISP button @3 for 2 seconds or more. This enables the clock editing mode. * The editable fields will be indicated when the display flashes. 3) To move between the hour and minute fields, use the left (hour) and right (minute) buttons ill. 4) To store the clock setting, press the BAND button til. Notes: • II you select another operation mode before completing the above procedure, the dock setting operation will be canceled. • Removing the vehicle's battery lor a check or repair null cause the dock to reset to 1:00. Set the clock again if this happ...

Scarica la tua

Per scaricare, digitare 2 cifre :