valutazioni - 5, GPA: 3.2
(
)
)
|
Foto e specifiche Hyundai H-1419 |
Facilità d'uso
Press PLAY/PAUSE button again to resume playing. • To stop the CD, press the STOP button. If you press PLAY/PAUSE button now the playback will start from first track. Skip and search mode • Press the NEXT/TUNE UP button once to skip to the next track. Press and hold this button to search for a particular point at high speed forward. Release the button to resume normal play. • Press the BACK/TUNE DOWN button once to the beginning of the current track. Press the BACK/TUNE DOWN button twice to skip back to previous track. Press and hold this button to search for a particular point at high speed backward. Release the button resume normal play. Repeat, intro and random modes • Press the MEM/PROG/P-MODE key repeatedly to select the following options: - REPEAT - to repeat the current track - REPEAT ALL - to repeat all tracks (full CD, USB or SD) - INTRO - to "sample" all the music on the CD/USB/SD (about first 12 seconds of every song will be played) - RANDOM - to play a random mix of all the songs on CD/USB/SD Program mode • Up to 60 tracks can be programmed for disc play in any order or the same track can be repeated up to 60 times. • Before use, be sure to stop the CD by pressing the STOP button. • Press the MEM/PROG/P-MODE key. The display will show "P01". This indicates that the set is now in memory programming mode, at the first memory position. • Select a desired track by using the BACK/TUNE DOWN and NEXT/TUNE UP buttons. • Press the MEM/PROG/P-MODE key again to confirm. • The set will advance to next memory position, the display will show "P02". • Repeat steps described above to enter additional memories into the program if necessary. • After a maximum of 60 songs (or less) have been selected as described above, press the PLAY/ PAUSE button to start playing the programmed tracks. • The "PROG" symbol will appear to indicate that you have saved a program-memory (sequence). • The program memory will be cleared when you press STOP button twice. 6 MP3 operation • Press ON/OFF key once to switch on the system power • Press CD key to enter CD mode. • Open the CD door. Put a MP3 disk into the CD compartment and close the CD door. • The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the display will indicate the current track no: (001). On the display "MP3" symbol will appear to indicate that MP3-CD is playing. • Press the NEXT/TUNE UP button once to skip to the next track. Press and hold this button to search for a particular point at high speed forward. Release the button to resume normal play. • Press the BACK/TUNE DOWN button once to the beginning of the current track. Press the BACK/TUNE DOWN button twice to skip back to previous track. Press and hold this button to search for a particular point at high speed backward. Release the button resume normal play. • You can use the +10/MEM + key to jump 10 songs ahead or -10/ MEM - key to jump 10 songs backward. This is useful if you have many songs on you want to quickly jump to a particular song. • Press +10/MEM + key or -10/MEM - key several times until you reach a song number near to your desired song, and then press BACK/TUNE DOWN or NEXT/TUNE UP repeatedly to arrive and the exact song you desire. • If your MP3-CD has folders, you can select the folder to playback. Press FOLDER/FM-MODE (FM mono/stereo) key to switch to the next folder. The set will start playing the first song in the next folder. • If the set is in "STOP" mode and you press FOLDER/FM-MODE (FM mono/stereo) key, the unit will switch to the next folder but the playback will not start automatically. Press PLAY/PAUSE button to start playback. Note: Good quality sound is guaranteed only when playing licensed MP3 discs. Text dispay mode (ID3-tag) • The set can display the text information (ID3-tags) of MP3 files on the LCD. • During playback of an MP3 file approximately every 5 seconds the display will automatically switch to text mode and display ID3-tag information. • After the ID3-tag information has been displayed the unit will switch back to the normal display (track # and palyback time) for about another 5 seconds. • This sequence will repeat continuously as follows: Track number + playback time display (about 5 seconds) => ID3-tags (text display). USB flash drive/ SD-card operations • This unit is equipped with a USB socket which can accept and play MP3 files stored on standard USB flash (compatible with usb version 1.1 & 2.0). • This unit is also equipped with an SD card socket which can accept and play MP3 files stored on standard SD cards. • To use USB drives/ SD cards for MP3 playback insert the USB drive or SD card into the appropriate socket and press the USB/ SD key (once for USB and twice for SD card). • The display will show “USB” or "SD" (depending on which one you are using) symbol. • If MP3 files are found the set will start playback of the first...