valutazioni - 6, GPA: 4.2
(
)
)
|
Facilità d'uso
On the remote (CFD-G50/G50L only) 1 Press x. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to programme in the order you want. 4 Press N. 1 Press x. “Cd” appears in the display. 2 Press PLAY MODE•MONO/ST until “PGM” appears in the display. 3 Press the .or >then press DISPLAY ENT• MEMORY for the tracks you want to programme in the order you want. Programmed track Playing order 4 Press uto start programme play. x ., > PLAY MODE MONO/ST 16GB The CD Player Tips • You can play the same programme again, since the programme is saved until you open the CD compartment. • You can record your own programme. After you’ve created the programme, insert a blank tape and press z to start recording. To cancel Programme Play Press PLAY MODE•MONO/ST until “PGM” disappears from the display. To check the order of tracks before play Press DISPLAY ENT•MEMORY. Every time you press the button, the track number appears in the programmed order. To change the current programme Press xonce if the CD is stopped and twice if the CD is playing. The current programme will be erased. Then create a new programme following the programming procedure. The CD 17GB The CD Player Enjoying sound effects (LOOP/FLASH) (CFD-G50/G50L only) You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. LOOP FLASH 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP “flash” the CD sound FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. 18GB The CD Player The Radio Presetting radio DISPLAY ENT RADIO BAND stations MEMORY AUTO PRESET You can store radio stations into the player’s memory. You can preset up to 30 radio stations (CFD-G30/G50) or 40 Radio stations (CFD-G30L/ G50L), 10 for each band in any order. The RadioPRESET –, + Tip If you automatically preset the “FM1” or “FM2” band, 10 radio stations are stored in “FM1” band and 10 more radio stations are stored in “FM2” band. On the remote (CFD-G50/G50L only) 1 Press BAND until the band you want appears in the display. 2 Tune in a station you want. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. 1 Press RADIO BAND•AUTO PRESET until the band you want appears in the display. 2 Hold down RADIO BAND•AUTO PRESET for 2 seconds until “AUTO” flashes in the display. 3 Press DISPLAY ENT•MEMORY. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Tune in a station you want. 3 Hold down DISPLAY ENT•MEMORY for 2 seconds until the preset number flashes in the display. 4 Press PRESET + or – until the preset number (1 to 10) you want for the station flashes in the display. 5 Press DISPLAY ENT•MEMORY. The new station replaces the old one. 19GB The Radio Playing preset RADIO BAND AUTO PRESET radio stations Once you've preset the stations, use PRESET + or – to tune in to your favorite stations. PRESET –, + On the remote (CFD-G50/G50L only) 1 Press BAND to select the band. 2 Press the number buttons to tune in the stored station. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Press PRESET + or – to tune in the stored station. , 20GB The Radio The Audio Emphasis Selecting the POWER DRIVE WOOFER audio emphasis (SOUND/POWER DRIVE WOOFER) You can adjust the audio emphasis of the sound you are listening to. SOUND The Audio On the remote (CFD-G50/G50L only) Press WOOFER. Notes • While the sleeping timer is on, the POWER DRIVE WOOFER button does not light, even if the WOOFER function works. • When using the headphones, the WOOFER function does not work. Selecting the sound characteristic Press SOUND repeatedly to select the audio emphasis you want. Choose To get powerful, clean sounds, emphasizing low and high range audio light, bright sounds emphasizing high and middle range audio percussive sounds, emphasizing bass audio the presence of vocals, stressing middle range audio the whole dynamic range for music such as classical music Reinforcing the bass sound Press POWER DRIVE WOOFER to select or in the display. is more effective. When POWER DRIVE WOOFER function works, the button lights up. To return to normal sound, press the button until the indication disappears from the display . 21GB The Audio Emphasis The Timer Falling asleep to SLEEP music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. 1 Play the music source you want. 2 Press SLEEP to display “SLEEP.” 3 Press SLEEP to select the minutes until the player goes o...
Questo manuale è adatto anche per i modelli :Ricevitori - CFD-G50L (944.8 kb)