valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Internal format conversion function By installing an optional HKSR-5001, when the operation mode of this unit is 23.98PsF or 24PsF, a 59.94i or 60i mode HD SDI output (audio/VITC multiplex) is made available. Additionally, conversion in either direction between 1080.1920 and 720.1280, and conversion from 4:2:2 signal to 4:4:4 signal is possible, and with the additional installation of an HKSR-5003, conversion from a 4:4:4 signal to a 4:2:2 signal. Noiseless playback with DT heads When using the HDCAM-SR or HDCAM format, the dedicated playback DT heads allow you to perform noiseless playback in the range from –1 to +2 times normal speed, including still-picture playback. When using the Digital Betacam format, the playback range is from –1 to +3. However, Digital Betacam playback requires the HKSR-5002 (option). Video and audio confidence heads Video and audio (channels 1 through 12, or 4 channels for the HDCAM format (SRW-5500 only)) signals can be recorded and simultaneously played back to check the recording. Internal time code generator and reader The internal time code generator allows you to record time code (LTC or user bits) together with video and audio signals. Time codes (LTC or user bits) can be read during playback using the time code reader. Computer servo system Computer-controlled servo motors provide direct drive for the drum, capstan, and two reels, enabling quick and accurate tape access. Capstan override function You can adjust the playback speed by ±15% to ensure synchronization between, for example, two VTRs playing back the same program. Independent audio level control It is possible to adjust the recording and playback levels either independently on each channel or simultaneously on all 12 channels (or 4 channels for HDCAM format (SRW5500 only)) while monitoring the peak values. Tele-File1) memory label system This unit incorporates the Tele-File memory label system to allow users to read, write and update videocassette management information, log data (IN/OUT points) and cue point data on memory labels, providing greater efficiency in cassette management and editing. 1) Tele-File A contact-free system for writing, reading, and modifying video cassette- related information on IC memory-bearing labels. Tele-File is a trademark of Sony Corporation. Program Play (P-PLAY) Function/Pitch Correction Function Program play is a function that allows play at ±5% of normal speed. Pitch correction of the audio is possible at the same time. This function is available only for the combination of SRW-5000/5500 Serial No. 12001 or higher and HKSR5001 Serial No. 11001 or higher. 1-1 Features Features for ease of operation Compact, lightweight, low power consumption The VTR is small and light enough to be used in outside broadcast vans or in EFP (Electronic Field Production) assignments. Remote control operation The VTR has a serial RS-422A 9-pin connector to allow control of the VTR by an external control unit. The VTR also comes with 9-pin REMOTE 1-IN(9P) and REMOTE 1-I/O(9P) connectors to support bridge connection of multiple SRW-5000/5500 units or other VTRs equipped with 9-pin remote connectors for simultaneous operation. Furthermore, you can control the VTR from an external control unit with a parallel (50-pin) interface. Digital hours meter The meter can show the total elapsed time since the VTR was turned on, total drum revolution time, total tape running time and total number of threadings and unthreadings. Self-diagnosis This function allows the VTR to perform self diagnostics when a malfunction occurs. An error message is displayed and a history of all errors that have occurred is recorded. Easy-to-maintain plug-in boards The VTR uses plug-in circuit boards to simplify servicing and inspection. Mountable in standard 19-inch rack The unit can be mounted in an EIA-standard 19-inch rack. For rack mounting, refer to the Installation Manual. 1-1-2 Features of the Control Panel The control panel provides eight menu screens corresponding to different operation modes to allow fast and easy adjustment of necessary settings, as well as the ability to store menu settings to a memory stick for later recall. Menu-driven operations for a variety of purposes Eight menus are displayed on the 130 . 95 mm (5 1/8 inches . 3 3/4 inches) color display and are set using the 10 function buttons. You can register desired items to the menus other than the SET UP menu. Pressing the [F4] (PF ASSIGN) button in the SET UP menu displays the menu items that can be registered. HOME menu Use this menu to make the basic settings for recording, playback, and editing operations, and to select channels to be edited during insert editing. TC menu Use this menu to make time code settings. VIDEO menu Use this menu to adjust the video signals. The VIDEO menu screen shows the VTR operation mode, current position time code, time code type, and so on. AUDIO menu Use this menu to adjust the audio signals. The AUDIO menu screen shows the...