valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
8 14-1112.fm Page 9 Thursday, July 1, 1999 1:05 PM • Always plug the AC adapter into the CTR-107 before you plug it into the AC outlet, and unplug the AC adapter from the AC outlet before you unplug its barrel plug from the CTR-107. Follow these steps to connect the CTR-107 to AC power. 1. Set the adapter’s voltage switch to 6V. 2. Insert the adapter’s 5.5 mm outer diameter/2.1 mm inner diameter barrel plug into the adapter’s cord so it reads –TIP. 3. Insert the AC adapter’s barrel plug into the DC 6V jack on the CTR-107. 4. Plug the AC adapter into a standard AC outlet. 9 14-1112.fm Page 10 Thursday, July 1, 1999 1:05 PM Using Vehicle Battery Power You can power the CTR-107 from your vehicle’s cigarette- lighter socket using a DC adapter (not supplied), such as Cat. No. 273-1802. Cautions: • The recommended DC adapter supplies 6 volts and delivers at least 300 milliamps. Its center tip is set to negative, and its plug correctly fits the CTR-107’s DC 6V jack. Using an adapter that does not meet these specifications could damage the CTR-107 or the adapter. • Always plug the DC adapter into the CTR-107 before you plug it into the cigarette-lighter socket, and always unplug the adapter from the cigarette-lighter socket before you unplug it from the CTR-107. 10 14-1112.fm Page 11 Thursday, July 1, 1999 1:05 PM Follow these steps to connect the CTR-107 to vehicle battery power. 1. Set the DC adapter’s voltage switch to 6V. 2. Insert the adapter’s barrel plug into the CTR107’ s DC 6V jack. 3. Plug the adapter’s larger plug into the vehicle’s cigarette-lighter socket. 11 14-1112.fm Page 12 Thursday, July 1, 1999 1:05 PM USING THE EARPHONE To listen in privacy, insert the supplied earphone’s 1/8inch plug into the EAR jack. Note: Connecting the earphone automatically disconnects the built-in speaker. Listening Safely To protect your hearing, follow these guidelines when you use the earphone. • Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level. • Do not listen at extremely high volume levels. Extended high volume listening can lead to permanent hearing loss. 12 14-1112.fm Page 13 Thursday, July 1, 1999 1:05 PM • Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing. Traffic Safety Do not wear the earphone while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and is illegal in some areas. Even though some earphones are designed to let you hear some outside sounds when listening at normal volume levels, they still present a traffic hazard. 13 14-1112.fm Page 14 Thursday, July 1, 1999 1:05 PM OPERATION LOADING A CASSETTE TAPE Note: Metal tapes are not recommended for use with this cassette player. 1. Take up any slack in the tape by turning one of the cassette’s hubs with a pencil. Do not touch the tape. Caution: If you do not remove the excess slack, the tape might become tangled in the record/ playback mechanism. 14 14-1112.fm Page 15 Thursday, July 1, 1999 1:05 PM 2. Press STOP/EJECT to open the cassette compartment door. 3. Load the cassette with its open edge out, the side you want to play facing up, and its full reel to the left. 4. Close the door. 15 14-1112.fm Page 16 Thursday, July 1, 1999 1:05 PM PLAYING A CASSETTE TAPE 1. Load the cassette tape. 2. Press PLAY. The cassette plays until it reaches the end of the side, then it automatically stops. Note: Press PAUSE to temporarily stop playback. Press PAUSE again to resume playback. 16 14-1112.fm Page 17 Thursday, July 1, 1999 1:05 PM 3. Adjust VOLUME as desired. 4. Press STOP/EJECT to completely stop playback before it automatically stops. Press STOP/EJECT again to open the cassette compartment and remove the cassette tape. 17 14-1112.fm Page 18 Thursday, July 1, 1999 1:05 PM Using Fast-Forward/Rewind While the tape is stopped, press REVIEW/REWIND or CUE/FAST-F to rapidly wind the tape backward or forward. Press STOP/EJECT, then PLAY again to resume playback. If you press and hold down REVIEW/REWIND or CUE/ FAST-F while the tape is playing, you can hear the tape as it moves at a faster speed. This makes it easy to locate a specific part of a recording (such as the space between tracks). When you release REVIEW/ REWIND or CUE/FAST-F, the tape plays at its normal speed. 18 14-1112.fm Page 19 Thursday, July 1, 1999 1:05 PM Using the Tape Counter You can use the tape counter to help you find specific locations on the tape. At the beginning of a tape, press the reset button to reset the tape counter to 000. Then note the counter’s reading at the beginnng of each selection. To return to a selection, fast-forward or rewind the tape until the counter shows the noted reading. 19 14-1112.fm Page 20 Thursday, July 1, 1999 1:05 PM RECORDING Notes: • Before you load a cassette tape for recording, be sure its erase-protection tabs are in place (...