valutazioni - 6, GPA: 3.7
(
)
)
|
Facilità d'uso
For your safety it is necessary to refer to the Manual. • Dangerous voltage: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. • Caution: To reduce the risk of electric shock, do not remove cover (or back). Servicing should be performed by qualified service personnel. Power supply_ Battery operation • Open the battery compartment cover. • Insert 8 x LR14/C batteries. Please observe correct battery polarities or the unit will not work. • Close the battery compartment cover. AC operation • Before the first connecting of the unit check that voltage indicated in the specification table corresponds the mains voltage in your home. • Plug the corresponding end of cord into the AC socket on the back of the unit. • Insert the plug into power supply socket. Caution: • When the unit is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the unit from leakage of batteries. • Always switch off the unit when not in use. • Always unplug the unit from power supply when not used for a long time. Radio operation_ • Slide FUNCTION switch to AM or FM position. • Rotate TUNING knob to select a radio station. 3 • Adjust the sound volume level by rotating VOLUME knob. • To turn off the radio, slide FUNCTION switch to OFF/AUX IN position. Antenna • For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected. • The AM signal is picked up through the built-in ferrite antenna. The unit should be placed to a position for the best reception. Stereo headphone connecting_ • For private listening, insert 3.5 mm headphone into the stereo headphone jack. • Adjust volume control to the appropriate level as desired. • When the stereo headphone jack is plugged, speakers will disconnect automatically. Compact disc operation_ General playback operations • Open the CD compartment door by pressing and releasing on the edge marked OPEN/CLOSE on the CD door. • Place a disc into the CD compartment and close the compartment door. • Set FUNCTION switch to CD/MP3 position. "- -" is displayed shortly before the total amount of tracks is displayed. • Press PLAY/PAUSE button to start playback. • Press PLAY/PAUSE button to stop playback temporarily. Press again to resume playback. • Press STOP button to terminate the playback. Note: The playback of CD stops: - If you open the CD compartment door. - when you set FUNCTION switch to AM, FM or OFF/AUX IN position. - When entire CD has been played. 4 Skip and search mode During playback you can use PREVIOUS or NEXT buttons to choose a particular track. If you have selected a track in the stop or pause mode, restart playing by pressing PLAY/PAUSE button. • Press NEXT button to go to the next track, or press it repeatedly until the desired track number is shown in the display. • Press PREVIOUS button to return to the track that was previously played. Press repeatedly to return to previous tracks. • Press FOLDER UP button to select a folder (for MP3 discs). Find a specific section in a track • Press and hold NEXT or PREVIOUS button to fast forward/backward within the track. • Release the button when you hear the section you are seeking. Normal playback resumes. Playback modes During playback press PLAY MODE button repeatedly to activate repeated or random playback modes. The display shows the chosen function: • REPEAT 1 - the current track is played repeatedly. • REPEAT ALBUM - the selected folder is played repeatedly. • REPEAT ALL - the entire CD is played repeatedly. • RANDOM - repeats all tracks in random order. Track order programming Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. • Before playback press PLAY MODE button to go to programming mode. Blinking "PROG" and "P01" will be displayed. • Press FOLDER UP button repeatedly to select the desired folder (for MP3 discs). • Press PREVIOUS or NEXT button to select a track. • When your chosen track number is displayed, press PLAY MODE button to store the track. Blinking "PROG" and "P02" will be displayed. • Repeat 2 previous steps to select and store all desired tracks. 5 ♦ To start playback of your program, press PLAY/PAUSE button. Note: Good quality sound is guaranteed only when playing licensed discs. Program erasing You can erase the programmed contents by: • Opening the CD compartment door. ♦ Setting FUNCTION switch to AM, FM or OFF/AUX IN position. • Pressing STOP button twice during current play or when the player is stopped. AUX line-in connection_ You can connect any external audio device (like MP3 player) to this unit: ♦ Connect the device to the AUX IN jack (cable not included). • Set FUNCTION switch to OFF/AUX IN position. ♦ Adjust the volume of the external device if needed. Maintenance and care_ • Check ...