valutazioni - 3, GPA: 3
(
)
)
|
Facilità d'uso
Prefer servicing to qualified service personnel. • DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. • ATTENTION: The owner's manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. Power supply and connection BATTERY OPERATION • Set the FUNCTION switch to the TAPE position. • Open the battery compartment cover. • Insert 4 UM-1 (D) size batteries. Please observe correct battery polarities or the set will not work. • Close the battery compartment cover. 2 AC OPERATION • Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home. • Plug the corresponding end of cord into the AC socket on the rear of the set. • Insert the plug into power supply. CAUTION: • When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries. • Always unplug the appliance from power supply, when no use long time. • This unit cannot be operated by batteries if the AC power cord is connected to the unit. Function FUNCTION SWITCH • Position to RADIO for: -Radio reception -Cassette recording from the radio • Position to TAPE for: -Cassette playback Sound adjustment VOLUME The level of sound reproduced by the loudspeaker is adjusted by the VOLUME control. NOTE: During recording, adjusting the VOLUME control only affects the monitor sound and not the content of recording. Radio operation OPERATION • Set Function switch to RADIO position. • Select your desired broadcasting band with Band switch. • Rotate the Tuning control regulator to receive the desired broadcast. • Adjust the level of sound with Volume control regulator. • To turn off the radio, set the Function switch to TAPE position. 3 ANTENNA • For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected. • The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception. CAUTION: • Do not connect FM antenna to an external antenna. Cassette recorder operation CONTROLS • STOP/EJECT button During operation, depress to stop all deck operation. Press again to open the cassette door. • FAST FORWARD button and REWIND button Press to rapidly advance the tape in either forward or reverse direction. • PLAY button Press to start playback. • PAUSE button Press to stop tape operation temporarily. Press again to resume tape operation. • RECORD button Press to start recording. PLAY button will be activated automatically. CASSETTE PLAYBACK • Slide the Function switch to TAPE position. • Press the STOP/EJECT button to open the cassette compartment. • Insert a cassette with the tape side upward and push the cassette door to close the cassette compartment. • Press the PLAY button to start the playing. • Adjust the VOLUME control to the desired sound level. 4 Recording RECORDING FROM RADIO • Slide the Function switch to RADIO position. • Tune to the desired station by turning the Tuning control regulator. • Insert a blank cassette into cassette compartment with the tape side upward. • Press the PLAY button and RECORD button simultaneously to start recording. • Press the STOP/EJECT button when finished. NOTE: You may want to monitor playback during recording. You can adjust the sound with the VOLUME control. This adjustment does not affect the content of recording. Special features AUTOSTOP • During playback or recording, the unit will shut itself off automatically at the end of tape. Maintenance and care • Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time or is being run exclusively on the alternative power, remove the batteries to avoid leakage and damage. • Electronic products of this kind should never be subjected to moisture or extreme temperatures. • If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord is disconnected from the power supply). • The heads and capstan are in constant contact with the moving tape. Use a small cotton bud with alcohol or special tape head cleaner to clean these parts. Never touch the heads with anything metallic. ERASE PROTECTION • To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on the cassette tape's rear side. • When a cassette with removed plastic tabs is inserted, the recording button cannot be pressed. • If a cassette is to be erased and re-recorded at a later stage, simply cover the holes on the cassette where the tabs were removed, with a piece of strong adhesive tape. 5 Troubleshooting Carefully re-read the instructions to make sure the uni...