valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
If the product is not to be used for an extended period of time the batteries should be removed to prevent any possible damage to the product. LASER SAFETY This unit employs a laser, only qualified service personnel should attempt repair. A DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN CD DOOR AND INTERLOCK DEFATED. 3 34 55.qxd 16.09.2004 13:02 Page 4 ENGLISH USING THE RADIO 1. Select RADIO by pressing FUNCTION button. 2. Use the BAND selector to choose either FM or AM as required. FM BAND 3. If FM is selected ensure the telescopic aerial is fully extened and positioned vertically. 4. Press the UP/DOWN TUNING buttons until the desired station is located. 5. If the station is broadcasting in stereo the stereo indicator will illuminate. 6. To achieve optimum reception adjust the position of the telescopic aerial. AM BAND 7. For AM reception the product has an built-in aerial, to achieve best reception the product should be rotated, until the strongest signal is obtained. GENERAL 8. Once the required station has been located, adjust the VOLUME and BBS controls to the desired levels. 9. To store selected radiostation press MEMORY DIGI button. Select radiostation number by pressing REPEAT/MEM UP button, press MEMORY DIGI button again to store radiostation preset in memory. USING THE CASSETTE NORMAL PLAYBACK 1. Select TAPE Function. 2. Press the STOP/EJECT key to open the cassette compartment and insert a prerecorded tape, with the exposed portion of the tape upwards and the full spool on the right. Gently push the door to close. 3. Press the PLAY key to start playback, adjusting VOLUME control and BBS controls to the desired level. 4. To briefly suspend playback press the PAUSE key, releasing it resumes playback. 5. To advance or rewind the tape rapidly use the FAST FORWARD or REWIND keys. 6. To stop playback press the STOP/EJECT key, press it fully down to EJECT the cassette. Note: When the cassette reaches it’s end during play-back or recording, the mechanism will stop and the keys return to their normal positions. RECORDING 1. Please note Chrome or Metal tapes are not recommended for use in this product. 2. Select desired function (CD or RADIO) 3. Insert a blank tape with recording tabs intact into the cassette compartment. 4. Operate the desired function and select the material to be recorded. 5. Press RECORD key, the PLAY key will automatically engage. 6. The product has an built-in ALC circuit which automatically adjusts the record level for the quality recording. 7. To temporarily stop or edit the recording press the PAUSE button. 8. To stop recording press the STOP/EJECT button. Note: When recording from AM band a whistling noise may be heard. To reduce it’s presence move the BEAT CUT switch to position 1 or 2. 4 34 55.qxd 16.09.2004 13:02 Page 5 ENGLISH USING THE CD PLAYER 1. Switch the function selector to CD. 2. Press the OPEN button and insert a disc with the label facing uppermost. Close the lid. 3. After a few seconds, the product will scan the disc and the display will show the total number of tracks on the disc. If the disc is incorrectly inserted or defective the display will show “00” and go blank. 4. Press PLAY/PAUSE or start playback adjust VOLUME and BBS controls to desired level. Current track being played will be shown in the display. 5. To temporarily pause playback press the PLAY/PAUSE button. “II” shows in the display. To resume playback press this button again. 6. To stop playback press the STOP button. The display will show the total number of tracks on the disc. This remains in the display until either the disc is removed or another function is selected. 7. To skip up or down tracks on the disc use either “ >>l ” or “ l<< ” skip button. REPEAT PLAY 1. To repeat the track currently being played press the REPEAT button once. The “ ” indicator will flash continuously in the display. 2. To repeat the entire disc (continuous play) press REPEAT button twice. The “ All ” indicator will light up in the display. To return to normal play mode press REPEAT button until ‘Repeat' indicator disappears from the display, or press the STOP button. Playing A MP3 Disc /T\ 1. MP3 indicator appears (Track Number and Title) on the LCD display. /T\ 2. The player will start playing after TOC reading. vp1- 3. Select Track - Press the Digi button once, twice, or thirdly and digit representing hundredth, tenth, or first number position will flash respectively. - Press the skip up/down button to select your digits accordingly during flashing. 4. After selected your desired track, press “ PLAY ” button. Important Notes: • This player not responsible for playability of MP3/CD-RW/CD-R discs in any case due to recording condition such as PC performance, writing software, media ability or etc. □ This symbol means that this unit is double insu...