For your safety, it is necessary to refer to the manual. DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. 2 • CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel. Power supply Battery operation • Open the battery compartment cover. • Insert 6 batteries (UM-1). Please observe correct batter

Therefore, it is not necessary to place the radio cassette recorder close to the source of sound. Set the volume control to lower position during recording from built-in condenser microphone. Sound features Tone control • This set is equipped with a type of Tone control function. • This function is particularly good for providing a small room. • For achievement of additional volume and depth of a sound use the Tone control regulator of frequency of sounding. 4 MEGA BASS button • This set

You can adjust the sound with the VOLUME control. This adjustment does not affect the content of recording. MAINTENENCE AND CARE • Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time or is being run exclusively on the alternative power, remove the batteries to avoid leakage and damage. • Electronic products of this kind should never be subjected to moisture or extreme temperatures. • If necessary, clean the unit wi

For your safety, it is necessary to refer to the manual. • DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. • CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel. 2 POWER SUPPLY BATTERY OPERATION • Set the FUNCTION switch to the TAPE position. • Open the battery compartment cover. • Inse

Before use, be sure to press the STOP button. • Press the PROGRAM button. • Select a desired track by using the CD SKIP buttons. • Press PROGRAM button to confirm. • Repeat steps described above to enter additional memories into the program if necessary. • When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed. • To stop the CD, press the STOP button. • To remove the CD from the unit open the CD door. • To turn off the

The set should be placed to a position for the best reception. FM and FM stereo reception • Set the BAND switch to FM position, programmer is received in mono mode. NOTE: In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono. • Many FM stations broadcast their programmes in stereo. When tuning in stereo broadcasts, the FM stereo indicator will light up automatically. Cassette recorder operation Cassette playback • Slide th

For your safety, it is necessary to refer to the manual. • DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. • CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel. Power supply_ Battery operation • Open the battery compartment cover. • Insert 4 batteries (UM-1). Please observe correct batte

The set should be placed to a position for the best reception. FM and FM stereo reception • Set the BAND switch to FM position, programmer is received in mono mode. NOTE: In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono. • Set the BAND switch to FM ST position, programmer is received in stereo mode, thus FM STEREO indicator should light up. Cassette recorder operation Cassette playback • Slide the FUNCTION switch to T

For MONO transmission or weak, noisy reception, put the BAND switch into FM position to improve the sound quality. Compact disc operation_ • Set FUNCTION switch to CD/USB/SD position. • Open the CD door by pressing on the “PUSH OPEN” field. Put a CD into the CD compartment with the label side upwards and close the CD door. Display shows the total number of tracks. Play/pause mode • Press the PLAY/PAUSE button to start play. • Press the PLAY/PAUSE button to pause at any track when playing.

For your safety, it is necessary to refer to the manual. • Dangerous voltage: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. • Caution: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel. Power supply_ Battery operation • Open the battery compartment cover. • Insert 8 x 1.5V UM-2 R14 “C” size batteries. Please obs