valutazioni - 5, GPA: 4.2
(
)
)
|
Foto e specifiche Husqvarna 125LDx |
Facilità d'uso
WARNING:Listenoutforwarn- ingsignalsorshoutswhenyouarewearinghearingprotection.Alwaysremoveyourhearingprotectionassoonastheenginestops. 5 HEARING PROTECTION Wear hearing protection that provides adequate noise reduction. EYE PROTECTION Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with EN 166 in EU countries. GLOVES Gloves should be worn when necessary, e.g., when fitting cutting attachments. BOOTS Wear anti- --slip and stable boots. CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on shrubs and branches. Always wear heavy, long pants. Do not wear jewelry, shorts sandals or go barefoot. Secure hair so it is above shoulder level. FIRST AID KIT A first aid kit should be carried by operators of clearing saws, brushcutters or trimmers. GENERAL SAFETY PRECAUTIONS Machine’s safety equipment This section describes the machine’s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the “What is what” section to locate where this equipment is positioned on your machine. The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest service workshop. IMPORTANT! All servicing and repair work on the machine requires special training. This is especially true of the machine’s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. WARNING: Never use a machine that has faulty safety equipment! Follow the control, maintenance and service instructions described in this section. If your machine fails any of these checks contact your service agent to get it repaired. Pressthethrottlelockandmakesureitre- turnstoitsoriginalpositionwhenyoure- leaseit. Check that the throttle control and throttle lock move freely and that the return springs work properly. Throttle lock The throttle lock is designed to prevent accidental operation of the throttle control. When you press the lock (A) (i.e. when you grasp the handle) it releases the throttle control (B). When you release the handle, the throttle control and the throttle lock both move back to their original positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting. Make sure the throttle control is locked at the idle setting when the throttle lock is released. 6 A B See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment rotates with the throttle in the idle position then the carburettor idle setting must be checked. See instructions under the heading Maintenance. Stop switch Make sure the engine stops when you push and hold the stop switch. GENERAL SAFETY PRECAUTIONS Cutting attachment guard This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked. Always use the recommended guard for the cutting attachment you are using. See the “Technical data” section. WARNING: Never use a cutting attachment without an approved guard. See the section on “Technical data”. If an incorrect or faulty guard is fitted this can cause serious personal injury. Use of incorrectly wound trimmer line or an incorrect cutting attachment increases the level of vibration. WARNING: Overexposure to vibration can lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin color or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures. Muffler The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. 7 In countries that have a warm and dry climate there is a significant risk of fire. We therefore fit certain mufflers with a spark arrestor mesh. Check whether the muffler on your machine is fitted with this kind of mesh. Mufflerbolts For mufflers, it is very important that you follow the instructions on checking, maintaining, and servicing your ma...