valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Pay particular attention to all sections regarding safety. Read and understand all these instructions before operating this product and save these instructions. Be familiar with the controls and the proper use of equipment. For safe operations: 1. Keep work area clean. Cluttered areas and benches invite injuries. 2. Consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools where there is risk of fire or explosion. 3. Guard against electric shock. Avoid body contact with earthed or grounded surfaces, e.g. pipes, radiators, stoves, ovens, refrigerators. 4. Keep children away. Do not let visitors touch the tool or extension cord. All visitors should be kept away from area. Local regulations may restrict the age of the operator. 5. Store idle tools. When not in use, tools should be stored in a dry, high or locked up place, out of reach of children. intended; for example, do not use chain saw attachment to cut tree limbs or logs. 8. Dress properly. Do not wear loose clothing or jewellery that can be caught in moving parts. Long trousers, non-slip gloves and sturdy work shoes with non-skid soles are recommended when working outdoors. Wear protective hair covering to contain long hair. 9. Use protective equipment. To avoid injury, wear ear, eye protection, face or dust mask if the operation is dusty. To avoid injury from falling branches, wear helmet. Eye protection must meet applicable CE requirements. 10. Do not abuse the cord. Never carry the tool by the cord or yank it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges. 11. Maintain tool with care. Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged, have it repaired by an authorised service facility. Inspect extension cords periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease. 12. Disconnect tools. When not in use, before servicing and when changing accessories such as blades, bits and cutters. 13. Remove adjusting keys and spanners. Form the habit of checking to see that keys and adjusting spanners are removed from the tool before turning it on. 14. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch trigger. Ensure switch is off when plugging in. 15. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor use. 16. Important extension cord information: a. Make sure the extension cords are in good condition before use. b. Based on the total length of cord that you are going to use, check the chart to make sure the cord meets the correct minimum cord gauge (AWG) requirements. 6. Do not force the tool. It will do the job better and safer at the rate for which it was intended. Walk, never run. 7. Use the right tool. Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not IMPORTANT NOTE: Using an undersized cord or a larger number cord gauge (AWG) than recommended in the chart, will cause a loss in power and overheating of the unit. Using a smaller number cord gauge (AWG) than recommended in the chart, is acceptable. Extension cord chart (minimum cord gauge (AWG) Length (metres) .3 to 7.8 7.9 to 15.5 15.6 to 30.6 30.7 to 45.7 Cord gauge (AWG) 18 16 14 12 17. Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired, ill or under the influence of alcohol or other drugs. 18. Check...
Questo manuale è adatto anche per i modelli :Clippers - Pruner E System (3.02 mb)
Clippers - Pruner E System (3.02 mb)
Clippers - Pruner E System (3.02 mb)
Clippers - Pruner E System (3.02 mb)