valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Caution: The trimmer will start immediately! Note: The hedge trimmer will start only when both grip safeties (C/5 and C/7) are depressed. Caution: If the hedge trimmer starts after acuating only one of the switches, do not work with the trimmer! Take the trimmer to a MAKITA service center. To switch off: Release one or both grip safeties. The trimmer will stop immediately. Checking the cutter brake Check the cutter brake each time before starting work! - Start the trimmer as described above. - Grasp the front handle firmly with one hand. Hold the rear handle with the other hand. - Depress and then release the rear handle grip safety (C/7). The cutter should stop instantly. Important: If the cutter does not stop immediately during this test, do not work with the trimmer! Take the trimmer to a MAKITA service center. MAINTENANCE To ensure a long servicelife and to prevent any damage the maintenance work described in the following must be performed regularly. The product guarantee will be automatically invalidated if this maintenance is not carried out regularly and according to the instructions. Caution: Always disconnect the power cord before doing any work on the hedge trimmer! Always wear protective gloves! Cleaning and care of the cutter Caution: Take special care when cleaning and maintaining the cutter (injury hazard). Check the cutter regularly for damage, and clean it with a suitable brush or cloth. If cutting performance should become unsatisfactory after extensive use, contact a service center. Periodic care and maintenance instructions Before every use • Check the entire hedge trimmer for cracks and breakage. If there is any damage, immediately have the trimmer repaired by a qualified service technician. • Check the functioning of the on/off switches. • The ventilation slots must be unobstructed. • Check the power cord. If there is any damage, have it replaced at a qualified service center. After every use • Clean the entire trimmer. • Clean and lightly oil the cutter. Storage • Store the entire trimmer in a safe place in a dry room. Trouble shooting The motor will not run: - No power supply, power cord defective, check fuse. The motor runs, but the cutter doesn.t move: Take the trimmer to a MAKITA service center. STOP Service Service p equipped with special tools and test instruments. We therefore recommend that you consult a MAKITA service centre for all work not described in this instruction manual. The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost- effective solutions and advise you in all matters. Please contact your nearest service centre (list enclosed). Spare parts Reliable long-term operation, as well as the safety of your hedge trimmer, depend among other things on the quality of the spare parts used. Use only original MAKITA parts, marked Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare parts lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and parts innovations. Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product guarantee. Guarantee MAKITA guarantees the highest quality and will therefore reimburse all costs for replacement of damaged parts resulting from material or production faults occurring within the guarantee period after purchase. Please note that in some countries special guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product. Please note that we cannot accept any responsibility for damage caused by: • Failure to observe the instructions in the Instruction Manual. • Non-performance of the required maintenance and cleaning. • Normal wear and tear. • The use of unapproved extension power cords. • The use of force, improper use, misuse or accidents. • Overheating damage caused by blockage of the ventilation slots. • Work on the hedge trimmer by unskilled persons or inappropriate repairs. • Use of unsuitable spare parts or parts other than original MAKITA parts, insofar as they caused the damage. • Damage related to conditions arising from lease or rent contracts. Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed by a MAKITA service centre. Herzlichen Dank fur Ihr Vertrauen! Herzlichen Dank fur Ihr Vertrauen! Die Modelle UH 4050, UH 4850, UH 5550 und UH 6350 sind besonders leichte, handliche Heckenscheren mit hoher Lei- stung und gunstigem Leistungsgewicht. Die ergonomische Gestaltung der Griffe und Bedienungselemente sorgen fur Bedienungskomfort und weitgehend ermudungsfreies Arbeiten mit der Heckenschere. Eine Zugentlastung fur das ...
Questo manuale è adatto anche per i modelli :Clippers - UH 4050 (1.6 mb)
Clippers - UH 5550 (1.6 mb)