valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. EC DECLARATION OF CONFORMITY GT20/GT25 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, BS 2769 (EN 50144 not including 23.5), EN 55014, EN 61000, 2000/14/EC, Hedge trimmer . 330 W, Annex V Level of sound pressure, measured according to 2000/14/EC: GT20 GT25 LpA (sound pressure) dB(A) 81 81 LWA (acoustic power) dB(A) 94 94 LWA (guaranteed) dB(A) 99 99 Always wear ear protection if the sound pressure exceeds 85 dB(A). Hand/arm weighted vibration value according to EN 50144: GT20 GT25 < 2.5 m/s2 < 2.5 m/s2 Brian Cooke Director of Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-12-2001 INTENDED USE Your Black & Decker hedgetrimmer GT20/GT25 has been designed for trimming hedges, shrubs and brambles. This tool is intended for consumer use only. SAFETY INSTRUCTIONS Warning symbols The following symbols are used in this manual: Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instructions in this manual. Denotes risk of electric shock. Read the manual prior to operation. Know your tool Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. . Read all of this manual carefully before operating the tool. . Before operating the tool, make sure that you know how to switch the tool off in an emergency. . Retain this manual for future reference. 6 ENGLISH ENGLISH General 1. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, i.e. in the presence of flammable liquids and gases. Keep the work area free from debris and obstacles. 2. Keep children away Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable. 3. Dress properly Do not wear loose clothing or jewellery, as these can be caught in moving parts. Preferably wear rubber gloves and non-slip footwear when working outdoors. Wear protective hair covering to keep long hair out of the way. 4. Personal protection Always use safety glasses. Use a face or dust mask whenever the operations may produce dust or flying particles. Wear ear protection whenever the sound level seems uncomfortable. 5. Guard against electric shock Prevent body contact with earthed or grounded surfaces (e.g. metal railings, lamp-posts etc.). Electric safety can be further improved by using a high-sensitivity (30 mA/30 mS) residual current device (RCD). 6. Do not overreach Keep proper footing and balance at all times. 7. Stay alert Watch what you are doing. Use common sense. Do not operate the tool when you are tired. 8. Secure workpiece Where appropriate, use clamps or a vice to hold the workpiece. It is safer and it frees both hands to operate the tool. 9. Remove keys and adjusting wrenches Always check that keys and adjusting wrenches are removed from the tool before operating the tool. 10.Extension cables Before use, inspect the extension cable and replace if damaged. Only use extension cables intended for outdoor use. 11.Use appropriate tool The intended use is described in this instruction manual. Do not force small tools or attachments to do the job of a heavy-duty tool. The tool will do the job better and safer at the rate for which it was intended. Do not force the tool. Warning! The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury. 12.Check for damaged parts Before use, carefully check the tool and mains cable for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the tool will operate properly and perform its intended function. D...
Questo manuale è adatto anche per i modelli :Clippers - GT20 (970.51 kb)
Clippers - GT25 (970.51 kb)
Clippers - GT250 (970.51 kb)