Log:
valutazioni - 3, GPA: 3.3 ( )

Istruzioni per l'uso Electrolux, Modello Power Head E System

Produttore : Electrolux
File Size : 2.98 mb
File Nome : ae124826-2021-4ec5-91f2-73b969275296.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


22. Work only in daylight or in good artificial light. 23. Keep all guards attached at all times when unit is operated. 24. Always use the shoulder strap. Adjust the strap for comfort before starting the motor. 25. Secure unit during transport to prevent damage or injury. 26. Machine should not be used in any position that causes any part to come within 3 metres of overhead electrical lines. Always be aware of overhead power lines. 27. Always keep a firm grip on both handles when motor is running: one hand grasps the front “loop” handle while the other hand grasps the rear handle. Severe injuries can result if you try to use this machine with only one hand or with an insecure grip. 28. Thoroughly inspect the area where equipment is to be used and removed all objects, which can be thrown by the machine. 29. Always keep area clear of children, pets, and bystanders. 30. Always inspect your unit before each use and ensure that all handles, guards and fasteners are secure, operating, and in place. Be sure that all electrical cords are not damaged or broken. 31. Always maintain and examine your attachments with care. Follow maintenance instructions given in manual. 32. Don’t attempt to repair any part of the extended reach E system. Have repairs made by a qualified repairman. See that only original “Mantis” parts are used. 33. Maintain a firm footing and good balance, do not overreach while trimming. Before you start to trim, check the work area for obstacles that might cause you to lose your footing, balance or control of the machine. While 35. 35. Securing the extension cord. operating the machine always be sure of a safe and secure Bend the extension cord about 40 cm from the plug end. operating position especially when using steps or a ladder. Push that bend through the oblong opening in the back of Always be sure of your footing on slopes. the handle. Then loop the bend under the cord retaining clips as shown. This will prevent the extension cord from detaching from the hedge trimmer plug. WARNING – DANGER IMPROPER ASSEMBLY OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY. MAKE SURE TO FOLLOW ALL INSTRUCTIONS CAREFULLY. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR LOCAL AUTHORISED MANTIS DEALER. 34. Always disconnect power cord from power source: a. Before cleaning blockages. b. Before checking, cleaning or working on the cutting portion of the unit. c. After striking a foreign object: inspect the cutting part for damage and make repairs before restarting and operating the unit. d. If machine starts to vibrate abnormally (check immediately). e. Whenever you leave the unit. B. Specification Power Head model Total weight Power rating Max speed Shaft length 330112 5.4 kg 0.95 kw 8000 RPM 91.4 cm C. Loop handle installation a) Orient the loop half of the handle as shown on the picture, and place it on the outer shaft of the Power Head. b) Align 4 holes of the second part of the handle with the holes of the loop half. 230V Power Head parts list KEY # DESCRIPT...

Questo manuale è adatto anche per i modelli :
Clippers - Power Head E System (2.98 mb)
Clippers - Power Head E System (2.98 mb)
Clippers - Power Head E System (2.98 mb)
Clippers - Power Head E System (2.98 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie