If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. • ..........Standard CMOS Features This setup page includes all the items in standard compatible BIOS. • ..........Advanced BIOS Features This setup page includes all the items of Award special enhanced features. • ..........Integrated Peripherals This setup page includes all onboard peripherals. • ..........Power Management Setup This setup page includes all the items of Green function features. • ..........PnP/PCI Configuration This setup page includes all the configurations of PCI & PnP ISA resources. • ..........PC Health Status This setup page is the System auto detect Temperature, voltage, fan, speed. • ..........Frequency/Voltage Control This setup page is control CPU clock and frequency ratio. • ..........Load Fail-Safe Defaults Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe configuration. GA-8I865PEM-775 Motherboard - 28 English • ..........Load Optimized Defaults Optimized Defaults indicates the value of the system parameters which the system would be in best performance configuration. • ..........Set Supervisor Password Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup. • ..........Set User Password Change, set, or disable password. It allows you to limit access to the system. • ..........Save & Exit Setup Save CMOS value settings to CMOS and exit setup. • ..........Exit Without Saving Abandon all CMOS value changes and exit setup. -29 -BIOS Setup English 2-1 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) • IDE Channel 0 Master • IDE Channel 0 Slave • IDE Channel 1 Master • IDE Channel 1 Slave Drive A Drive B Floppy 3 Mode Suport Halt On Base Memory Extended Memory Total Memory Mon, Nov 22 2004 22:31:24 [None] [None] [None] [None] [1.44M, 3.5"] [None] [Disabled] [All, But Keyboard] 640K 239M 240M Item Help Menu Level• Change the day, month, year Sun. to Sat. Jan. to Dec. 1 to 31 (or maximum allowed in the month) 1999 to 2098 ........: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date The date format is , , , . Week The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan. Through Dec. Day The day, from 1 to 31 (or the maximum allowed in the month) Year The year, from 1999 through 2098 Time The times format in . The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00. IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0/1 Master/Slave IDE Device Setup. You can use one of three methods: • Auto Allows BIOS to automatically detect IDE devices during POST(default) • None Select this if no IDE devices are used and the system will skip the automatic detection step and allow for faster system start up. • Manual User can manually input the correct settings. Access Mode Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto(default:Auto) Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors If a hard disk has not been installed, select NONE and press . GA-8I865PEM-775 Motherboard - 30 English Drive A / Drive B The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch when 3 Mode is Enabled). 720K, 3.5" 3.5 inch double-sided drive; 720K byte capacity 1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity. 2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity. Floppy 3 Mode Support (for Japan Area) Disabled Normal Floppy Drive. (Default value) Drive A Drive A is 3 mode Floppy Drive. Drive B Drive B is 3 mode Floppy Drive. Both Drive A & B are 3 mode Floppy Drives. Halt on The category determines whether the computer will stop if an error is detected during power up. No Errors The system boot will not stop for any error that may be detected and you will be prompted. All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other errors. (Default value) All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors. All, But Disk/Key The system boot ...
