valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
3 GA-4KXSV-RH Motherboard Chapter 1 Introduction Features Summary Form Factor • 12” x 9.6” ATX size form factor, 6 layers PCB. CPU • Supports Intel® Pentium® 4 / Pentium® D processor • Intel® Prescott LGA 775 supports 533/800/1066MHz FSB • L2 cache on-die per processor from 1M Chipset • Intel® 945G Chipset • Intel® ICH7R • Intel® 6700 PXH Memory • 4 x DDRII socket up to 4 GB • Supports Dual Channel Un-buffered DDRII 400/533/667 • Support 256MB, 512MB, and 1GB memory I/O Control • ITE IT8712F-A Super I/O Expansion Slots • Supports 2 PCI slots 32-Bit/33MHz (5V) • Supports 2 PCI-X slots 64-Bit/133MHz • Supports 1 PCI-Express x1 slot • Supports 1 PCI-Express x16 slot SATA RAID Controller • ICH7R built in SATA RAID 0,1,5, 0+1 without Linux support • Supports 4 SATAII conntectors IDE RAID Controller • ITE IT8212F built in IDE RAID 0,1, 0+1 On-Board Peripherals • 1 IDE connector • 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes. • 2 PS/2 connectors • 1 Parallel port supports Normal/EPP/ECP mode • 1 Serial port (COM) • 4 x USB 2.0 • 1 VGA connector • 1 x LAN RJ45 • 4 x SATAII connectors Hardware Monitor • CPU/Power/System Fan Revolution Detect • CPU shutdown when overheat • System Voltage Detect 4 Introduction On-Board Graphic • Build in Intel® 945G Chipset On-Board Audio • Realtek® ALC 880 On-Board LAN • Intel 82573V Gigabit Ethernet controllers Hardware Monitor • ITE IT8712F-A controller • Enhanced features with CPU Vcore, DDRII 1.8V reference, VCC3 (3.3V), VCC5V, +12V, +5V SB, CPU Temperature, and System Temperature Values viewing by BIOS • AWARD BIOS on 4Mb flash RAM Additional Features • PS/2 Mouse wake up from S1 under Windows Operating System • External Modem wake up • Supports S1, S3, S5 under Windows Operating System • Wake on LAN (WOL) • AC Recovery • Supports Console Redirection • Supports 4-pin Fan controller 5 GA-4KXSV-RH Motherboard GA-4KXSV Motherboard Layout 1. CPU 21. DDRII 3 2. Intel 945G 22. DDRII 4 3. Intel 6700 PXH 23. PCIEX1 4. Intel ICH7R 24. PCI1(Supports 32bit/33MHz) 5. ITE IT8712F 25. PCI2 (Supports 32bit/33MHz) 6. ITE IT8212F GigaRAID 26. PCI-X 1 (Supports 64bit/66~133MHz) 7. Intel 82573V GbE 27. PCI-X 2 (Supports 64bit/66~133MHz) 8. Realtek ALC 880 28. PCIEX16 9. Main BIOS 29. CD_IN 10 Back BIOS 30. F_Audio 11. IDE RAID1 31. IR 12. IDE RAID2 32. F_USB1 13. IDE 33. F_USB2 14. FDD 34. COMB 15 SATA1 35. F_Panel 16. SATA2 36. CPU FA N 17. SATA3 37. NB FAN 18. SATA4 38. System FAN 19. DDRII 1 39. Power FAN 20. DDRII 2 40. ATX 41. ATX12V 6 Introduction 29 30 35 39 17 38 41 2 1 4 3 5 6 7 8 910 12 11 13 14 15 16 1833 22 21 20 19 23 24 25 26 27 28 31 32 36 37 40 7 GA-4KXSV-RH Motherboard Chapter 2 Hardware Installation Process 2-1: Installing Processor and CPU Haet Sink 2-1-1: Installing CPU Step 1 Gently lift the metal lever located on the CPU socket to the upper-right position. Step 2 Remove the plastic covering on the CPU socket. Step 3 Align the indented corner of the CPU with the triangle and gently insert the CPU into position. (Grasping the CPU firmly between your thumb and forefinger, carefully place it into the socket in a straight and downwards motion. Avoid twisting or bending motions that might cause damage to the CPU during installation.) Step 4 Once the CPU is properly inserted, please replace the plastic covering and push the metal lever back into its original position. Step 5 Close the lever, reverse step 1 & 2. 8 2-1-2: Installing Heat Sink Fig.1 Please apply heatsink paste on the surface of the installed CPU. Fig. 3 Place the heatsink on top the CPU and make sure the push pins align to the pin hole on the motherboard.Push down the push pins diagonally. Fig. 5 Please check the back side of teh motherboard. Make sure the push pin is seated firmly as the picture shown. Installation completed. Hardware Installation Process Male Push Pin The top of Female Push Pin Female Push Pin Fig. 2 ( to remove the heatsink, turning the push pin along the direction of arrow; and reverse the previous step to install the heat sink.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan) Fig. 4 Please make sure the Male and Female push pin are brought together. (for detailed installation instructions, please refer to the heatsink installation section of the user manual) Fig. 6 Attach the power connector of the heatsink to the CPU fan header located on the motherboard. 9 GA-4KXSV-RH Motherboard 2- 2: Install memory modules Before installing the processor and heatsink, adhere to the following warning: When DIMM LED is ON, do not install/remove DIMM from socket. GA-4KXSV has 4 dual inline memory module (DIMM) socets. It supports the Dual Channel Technology. The BIOS will automatically detects memory type and size during system boot. For detail DIMM installation, please refer to the following instructions. Channel A Channel B 10 Hardware Installation Process Table 1. Supported DIMM Mod...