valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
scheda madre - GA-H81-D3 (9.15 mb)
scheda madre - GA-H81-D3 (9.93 mb)
scheda madre - GA-H81-D3 (10.21 mb)
Facilità d'uso
The box contents are subject to change without notice. GA-H81-D3 Motherboard Block Diagram 1 PCI Express x16 CPU CLK+/- (100 MHz) LGA1150 CPU DDR3 1600/1333 MHz PCIe CLK (100 MHz) Dual Channel Memory DMI 2.0 FDI x16 PCI Express Bus LAN D-Sub RJ45 Dual BIOS Realtek® GbE LAN 2 SATA 6Gb/s Intel® H81 2 SATA 3Gb/s x1 PCI Express Bus 2 USB 3.0/2.0 x1 x1 x1 6 USB 2.0/1.1 PCIe CLK (100 MHz) PCIe to PCI Bridge PCI Bus COM 2 PCI Express x1 LPC Bus iTE® Super I/O LPT CODEC PS/2 KB/Mouse MIC (Center/Subwoofer Speaker Out) Line In (Rear Speaker Out) Line Out (Front Speaker Out) S/PDIF Out 3 PCI PCI CLK (33 MHz) For detailed product information/limitation(s), refer to "1-2 Product Specifications." Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: ••Prior to installation, make sure the chassis is suitable for the motherboard. ••Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation. ••Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components. ••When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely. ••When handling the motherboard, avoid touching any metal leads or connectors. ••It is best to wear an electrostatic discharge (ESD) wrist strap when handling ...