valutazioni - 4, GPA: 4.8
(
)
)
|
Facilità d'uso
You may also use the DIRECT-TO button to choose a destination. The destination must be an airport that has an established approach capability. A. Load Destination Airport GX60 Only 1. Press FPL twice to reach the home page Flight Plan Mode and press SEL, or press SEL while in the Nav function. 2. Press ENTER to prepare to load approach waypoints. 3. Turn the SMALL knob to display the available approach choices. 4. Press ENTER to select the displayed approach path. 5. Turn the SMALL knob to display the approach legs. 6. Press NAV to return to Navigation Mode. Approach Setup Summary B. Load Approach Information Load a destination airport. Load a stored Flight Plan, or edit the active Flight Plan. You may also use the DIRECT-TO button to choose a destination. The destination must be an airport that has an established approach capability. A. Load Destination Airport GX60 Only 1. Press FPL twice to reach the home page Flight Plan Mode and press SEL, or press SEL while in the Nav function. 2. Press ENTER to prepare to load approach waypoints. 3. Turn the SMALL knob to display the available approach choices. 4. Press ENTER to select the displayed approach path. 5. Turn the SMALL knob to display the approach legs. 6. Press NAV to return to Navigation Mode. Enroute Within 30 nm of Destination IAF Active Waypoint FAF Active Waypoint At FAF (MAP Becomes Active) At MAP (TO/FROM Transition) MAHP Active Waypoint Load Approach Enable Approach & enter altimeter setting (Approach annunciator turns ON) (CDI goes to 1 nm full-scale sensitivity) Verify Approach annunciator is ON Verify/Set OBS/HLD: ON for Procedure Turn or Hold OFF to sequence Verify green Approach-Active annunciator is ON Verify altimeter setting is entered Verify/Set OBS/HLD: OFF to sequence to MAP Verify Approach-Active annunciator is ON (CDI goes to 0.3 nm full-scale sensitivity) If NOT landing: Press OBS/HLD to cancel Approach-Active (Green Approach-Active annunciator turns OFF) (Approach Annunciator remains ON) (CDI goes to 1.0 nm full-scale sensitivity) Verify OBS/HLD is ON Location Action Approach Checklist GX60 Only DME-Arc Checklist At Arc Intercept On Arc Inbound Leg Intercept 1. Verify/Set OBS/HLD ON 2. USE DME-Arc Page in NAV mode 3. Verify or select DME-Arc Reference Waypoint and follow the prompts 4. Use Nav or Map mode and follow information 1. Use DME-Arc page in NAV mode or Map mode to navigate 2. Follow prompts for inbound leg intercept 1. Follow prompts to turn to next leg Location Action GX60 Only Turn LARGE Knob to change MHz Turn SMALL Knob to change kHz Press <-> to toggle Active & Standby Press MON to monitor Standby Press MEM to memorize Standby Press RCL to recall stored frequencies Press COM Turn the LARGE Knob to view frequency types Turn the SMALL Knob to view frequencies for selected type Comm Radio (COM) Active FPL FPL #1 . . . FPL #30 Create New FPL Turn LARGE Knob Press FPL Flight Plan (FPL) Press MSG New Old Turn LARGE Knob Turn SMALL Knob New Msg 1 . . . New Msg n Turn SMALL Knob Old Msg 1 . . . Old Msg n Messages (MSG) Database (DB) Create WPT by Lat/Lon Create WPT by Radial/Dist Update User Wpt w/PPos Create Wpt by User Grid* Delete User WPT Modify User WPT Delete WPT Comment Access Database Turn LARGE Knob Press DB * when enabled Press SYS. Turn LARGE Knob, then press ENTER. Nav Info Autonav Time Lat/Lon Units Program Nav Pages Mag Var Flight Timer Trigger Direct-To CDI Scaling Turn LARGE Knob System (SYS) System Info Date/Time Test Display Display Brightness Owner Name Model, SW Ver, S/N Fuel Units Baro UnitsTurn LARGE Knob GPS Sensor Healthy & Visible Satellites Satellites Used for Fix Satellite Search Status GPS Date & Time GPS Normal Reset Turn LARGE Knob Misc Sensors Encoding Altimeter Air Data Info Fuel InfoTurn LARGE Knob Comm Info RF Signal Level Noise Level Intercom Squelch Mic1 Intercom Squelch Mic2 Transmit Intercom Level Sidetone Level Headphone Level Turn LARGE Knob ...
Questo manuale è adatto anche per i modelli :Media Players - APOLLO GX60 (36.72 kb)