valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
See Firewall Issues on page 21. • After the laptop connects to the adapter, the TV displays the message Connected. Please wait. If this message is displayed more than 1 minute, the connection attempt failed. Click the Disconnect button and try connecting again. • After a successful connection, the laptop and TV screen display the same images, and your adapter is displayed in the Connected adapter field. You are now ready to enjoy and share your favorite pictures, videos, and music. 2. If you want to move Intel Wireless Display out of the display area, use the minimize button instead of the close button. • To disconnect from the adapter, click the Disconnect button. • See Setting Up Autoconnect on page 13 for information about automatically connecting to an adapter after the first connection has been made. Playing Media Playing DVDs with Intel Wireless Display Personal content you have burned into a disc will play. Many DVDs and Blu-ray discs include copy protection mechanisms that prevent playback over unprotected outputs. the Push2TV HD Wireless Adapter can play protected content on a protected content-supported laptop with Intel Wireless Display application software version 2.1 or higher. Closing the Laptop Lid Closing the lid of the laptop may put the system to sleep or turn it off, and as a result, end the Intel Wireless Display session. To close the lid and continue using the application: 1. Click the Windows Start icon and type Closing the lid in the search field. 2. Click the Change what closing the lid does link. 3. Next to the When I close the lid heading and under both the On battery and Plugged in headings, select Do nothing. 4. Click the Save changes button. Exiting Intel Wireless Display To exit Intel Wireless Display, click the Disconnect button, wait until the adapter disconnects, and click the Close Window button (red x) in the upper right corner of application window. If you click the Close Window button while still connected, you are asked if you want to close the connection. Click Yes to exit or No to cancel exiting. To not view this screen again, select the Don’t ask me next time check box. If you would like to turn off Intel My WiFi Technology after closing the application, click the Intel My WiFi Technology icon in the Windows taskbar and select Disable Intel My WiFi Technology. Resetting Intel Wireless Display Resetting reverts the application back to its out-of-the-box state. To reset, click Help and select About. Click Reset Settings. To proceed with the reset, click the Yes button on the Reset Intel Wireless Display settings screen. After you start Intel Wireless Display, all detected adapters are displayed as not previously connected. However, it is not necessary to enter a security code since the security settings are stored in the adapter. 2. Wireless Display Settings After you install the Push2TV HD Wireless Adapter, you can adjust the settings. Changing the Display Language To change the adapter display language, use the Restore Factory Settings button located on the bottom of the adapter. Figure 1. Cycling through display languages Pressing the Restore Factory Settings button for more than 5 seconds erases the adapter setup. See Restoring Factory Settings in Appendix A. To change the adapter’s language display: 1. While the adapter is turned on and the Push2TV HD menu is displayed on your TV, tap the Restore Factory Settings button. The language display on the TV changes. • To step through the language selections, tap the Restore Factory Settings button for less than 0.5 seconds. • To go back to the previous language selection, press the Restore Factory Settings button for more than 0.5 second and less than 5 seconds. 2. When the correct language is displayed, release the Restore Factory Settings button. Updating the Firmware If the firmware needs updating, there is an Update available button on the Adapter properties screen. The Properties button is available only if you are currently connected to an adapter. 1. Click the Update available button to begin the update process. Once the update begins, the TV screen displays Updating adapter. Please wait. After the procedure is complete, the adapter automatically disconnects from the laptop. 2. Scan again from the laptop to connect to the adapter. Wireless Display Properties The Properties button is only available if you are currently connected to an adapter. The Intel Wireless Display properties screen has two tabs, Behavior and Adapter. Behavior Properties Select the Behavior tab to display this screen: • Automatically hide the Intel Wireless Display application after connecting. This allows the application to minimize right after connecting. • Don’t ask me again options. You can select the following check boxes to stop the warning and prompts from displaying. -Don’t warn me that the connection will end if I close the application while connected. -Don’t prompt me to upgrade the firmware. -Don’t prompt me to download software up...