Log:
valutazioni - 3, GPA: 4 ( )

Istruzioni per l'uso Hamilton Beach, Modello 63225

Produttore : Hamilton Beach
File Size : 754.3 kb
File Nome : 840127800.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


• The mixer may emit an odor, especially when new. This is common with electric motors. • If the flat beater hits the bowl, stop the mixer. See page 3 for more information. If your mixer should malfunction or fail to operate, please check the following: • Is the mixer plugged in? • Is the fuse in the circuit to the mixer in working order? If you have a circuit breaker box, be sure the circuit is closed. • Turn the mixer off for 10 to 15 seconds, then turn the mixer back on. • If the problem is not due to one of the items mentioned above, see Customer Service Information. • DO NOT return the mixer to the retailer as they do not provide service. Customer Service Information If you have a question about your mixer, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your mixer. This information will help us answer your question much more quickly. MODEL:___________________ TYPE :___________________ SERIES: __________________ CUSTOMER SERVICE NUMBERS In the U.S. 1-800-851-8900 In Canada 1-800-267-2826 hamiltonbeach.com KEEP THESE NUMBERS FOR FUTURE REFERENCE! 5 55 840127800 ENv01.qxd 6/29/04 9:30 AM Page 6 Parts and Features 1. Mixer Head 2. Attachment Shaft 3. Bowl 4. Attachments Mixer attachments include a flat beater, a wire whisk, and a dough hook. 5. Bowl Lock 6. Pouring Shield (see page 8 for more information). 7. Mixer Release Button This button locks the Mixer Head down to ensure thorough mixing. When the Mixer Head is raised, it locks in the upright position. Hold the Mixer Head when lowering it into the bowl. Press up on the button to release the Mixer Head. 8. Setting Control Select a setting from 2 to 12. The setting of the mixer increases with the numbers. 6 840127800 ENv01.qxd 6/29/04 9:31 AM Page 7 How to Assemble Your Mixer To Attach the Bowl 1. Make sure Setting Control is set to O and Mixer is unplugged. 2. Press up on Mixer Release Button and tilt Mixer Head up. 3. Place Bowl in bowl lock and turn clockwise until Bowl locks into place. 4. Press up on Mixer Release Button and tilt Mixer Head down. 5. Plug Mixer into electrical outlet. To Remove: 1. Make sure Setting Control is set to O and Mixer is unplugged. 2. Press up on Mixer Release Button and tilt Mixer Head up. 3. Turn Bowl counterclockwise to unlock. To Attach the Beater, Wire Whisk, or Dough Hook wWARNING Injury Hazard Unplug mixer before inserting or removing beaters. Unplug mixer before cleaning. Failure to do so can result in brokenbones or cuts. 1. Make sure Setting Control is set to O and Mixer is unplugged. 2. Press up on the Mixer Release Button and tilt the Mixer Head up. 3. Insert Attachment onto Beater Shaft and press upward as far as possible. 4. Turn the Attachment to the right, hooking beater over pin on shaft. 5. Press up on Mixer Release Button and tilt the Mixer Head down. 6. Plug Mixer into electrical outlet. 7 840127800 ENv01.qxd 6/29/04 9:31 AM Page 8 To Attach the Pouring Shield 1. Make sure Setting Control is set to O and Mixer is unplugged. 2. Press up on Mixer Release Button and tilt Mixer Head up. 3. Attach Bowl and desired Mixer attachment. See page 7 for more information. 4. Slide the narrow section of Pouring Shield under Mixer attachment. See Illustration 1. 5. Place Pouring Shield on bowl. See Illustrations 2 and 3. 6. Align the narrow section of collar on Pouring Shield with indent on beater shaft. See Illustration 4. 7. Press up on Mixer Release Button and tilt Mixer Head down. 8. Turn opening of Pouring Shield to desired position. 9. Insert Pouring Shield tabs in slots on collar. See Illustration 5. 10. To remove the Pouring Shield, reverse the order of directions. 8 840127800 ENv01.qxd 6/29/04 9:31 AM Page 9 How to Use Your Mixer 1. Before first use, wash the Bowl, 5. Press up on Mixer Release Button two-piece Pouring Shield and and tilt Mixer Head down. attachments in hot, soapy water. 6. Plug Mixer into electrical outlet. Rinse and dry. Select desired setting. Prepare 2. Make sure Setting Control is set to recipe according to instructions. O and Mixer is unplugged. 7. When finished, turn Setting Control 3. Press up on Mixer Release Button to O. Unplug from outlet. and tilt Mixer Head up. Insert an 8. Press up on Mixer Release Button attachment. and tilt Mixer Head up. 4. Lock Bowl onto base using the 9. Remove Attachment. “Bowl Lock” feature. How to Set the Speed Control Plug mixer into a properly-grounded Electronic Speed Sensor Control electrical outlet. The Mixer has an Electronic Speed Speed Control should Sensor Control that is designed to always be set on low- maintain the same speed under differ est speed for starting, ent load conditions (such as when then gradually moved flour is added to a batter). You might to desired higher hear slight speed variations as the speed to avoid Mixer electronically adjusts to the splashing ingredients out of bowl. speed at whi...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie