valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Safety systems Start lock-out See “Operating positions” table. The appliance can be switched on in pos. 1 and 3 only: – when the bowl (11) has been inserted and turned until it locks into place and – the blender drive cover has been attached (9). Restart lock-out If the power is interrupted, the appliance remains switched on but the motor does not start running again when the power is restored. To switch the appliance on again, turn the rotary switch to 0/off, then switch on. Robert Bosch Hausgerate GmbH en Overload protection If the motor switches itself off while the appliance is being used, the overload protection feature has been activated. A possible cause may be that too much food was processed at one time. If a safety system is activated, see “Troubleshooting”. Explanation of the symbols on the appliance or accessory Follow the instructions in the instructions for use. Caution! Rotating blades. Caution! Rotating tools! Do not put fingers in the feed tube. Overview Please fold out the illustrated pages. Fig. . Base unit 1 Release button 2 Swivel arm “Easy Armlift” function to support the upward movement of the arm (see “Work positions”). 3 Rotary switch When the appliance has been switched off (position 0/off), the appliance runs automatically to the optimum position for changing the tools. MUM52..: 0/off = Stop M = Pulse switch at maximum speed, grip switch for required blending duration. Settings 1–4, Operating speed: 1 = low speed – slow, 4 = high speed – fast. MUM54../MUM56..: 0/off = Stop M = Pulse switch at maximum speed, grip switch for required blending duration. Settings 1–7, Operating speed: 1 = low speed – slow, 7 = high speed – fast. 4 On/Off display (MUM54../56..) Is lit while the appliance is operating (rotary switch on M or 1–7). Flashes if the appliance has been operated incorrectly, the electronic fuse has tripped or the appliance is defective – see section entitled “Troubleshooting”. 5 Drive for – continuous-feed shredder and – citrus press (special accessory *). When not in use, attach the drive cover. 6 Drive cover To remove the drive cover, press on the rear area and remove cover. 7 Drive for tools (stirrer, whisk, kneading hook) and mincer (special accessory *) 8 Drive for blender (special accessory *) When not in use, attach the blender drive cover. 9 Blender drive cover 10 Cord store MUM52../MUM54..: Stow the cord in the cord store. MUM56..: Automatic cord winder Bowl with accessories 11 Stainless steel stirring bowl 12 Lid Tools 13 Stirrer 14 Whisk 15 Kneading hook with dough deflector 16 Accessories bag For storage of the tools and cutting discs. Continuous-feed shredder 17 Pusher 18 Cover with filling shaft 19 Cutting discs 19a Reversible slicing disc – thick/thin 19b Reversible shredding disc – coarse/fine 19c Grating disc – medium-fine 20 Drive shaft 21 Housing with outlet opening Blender * 22 Blender jug 23 Lid 24 Funnel * If an accessory is not included in the product package, it can be purchased via the trade or customer service. Robert Bosch Hausgerate GmbH en Operating positions Fig. . ^iiEaiaca> _ENceE=ceEe~iaaO=iUE=~eeaa~aAEI=~ii~AU=iUE=iccaL ~AAEeeceo=ic=iUE=AceeEAi=CeaiE=~aC=aa=iUE=AceeEAi= eceaiaca=~aC=ea~AE=aa=iUE=ceEe~iaaO=eceaiaca= ~AAceCaaO=ic=iUae=i~AaEK qUE=eiaiEa=~ea=aiei=AE=EaO~OEC=aa=EiEeo= ceEe~iaaO=eceaiacaK Note The swivel arm features an “Easy Armlift” function which supports the upwards movement of the swivel arm. Selecting the operating position: • Press the Release button and move the swivel arm. Support movement with your hand. • Move the swivel arm until it engages in the required position. Position Drive MUM52.. MUM54.. MUM56.. 1 7 1–4 1–4 1–2 1–7 1–7 1–3 2 7 * – – 3 5 2–4 3–7 2–4 3–7 4 8 3–4 5–7 7 3–4 5–7 * Insert/remove whisk, stirrer or kneading hook. Add large quantities of ingredients. Operating the appliance oaea=cN=aaaieo> ac=aci=aaeEei=a~aae=eaiO=iaiaa=~aa=eeEe~e~iacae= Nce=iceaaaO=iaiU=iUE=~eeaa~aAE=~eE=AcaeaEiEK ^iiEaiaca> ac=aci=ceEe~iE=iUE=~eeaa~aAE=iaiUcii=~a= ~AAEeeceoLicca=aa=iUE=ceEe~iaaO=eceaiacaK ac=aci=ceEe~iE=iUE=~eeaa~aAE=EaeioK= ac=aci=EneceE=~eeaa~aAE=ce=~AAEeeceaEe=ic=UE~i= ecieAEeK=m~eie=~eE=aci=aaAeci~iEJe~NEK • Before operating the appliance and accessories for the first time, clean thoroughly; see “Cleaning and servicing”. Important information In these instructions for use the recommended reference values for the operating speed refer to appliances with a 7-setting rotary switch. For appliances with a 4-setting rotary switch you can find the values in brackets after the values for a 7-setting rotary switch. These instructions for use contain a sticker with reference values for the operating speed of the appliance when using the tools or accessories. We recommend attaching this sticker to the appliance (Fig. .). Preparation • Place the base unit on a smooth, clean surface. • Pull out the power cord (Fig. .). MUM52../MUM54.. Cord store: Pull out cable to the required length. MUM56.. Automatic cord winder: Pull out the...
Questo manuale è adatto anche per i modelli :Mixer - MUM54230AU/02 (4.43 mb)