valutazioni - 4, GPA: 3.5
(
)
)
|
Facilità d'uso
¦ To protect against risk of electrical shock, do not put mixer, cord, or plug in water or other liquid. ¦ Close supervision is necessary when any appliance is used by or near children. ¦ Turn unit off and unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. ¦ Avoid contacting moving parts. Keep hands, hair, clothing, as well as handheld spatulas and other utensils, away from beaters during operation to prevent injuryand/or damage to the mixer. ¦ Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to anauthorized service facility for examination, repair, or adjustment. ¦ The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury. ¦ Do not use outdoors. ¦ Do not let cord hang over edge of table or counter or touch hot surfaces. ¦ Remove beaters and spatula attachment from mixer before washing. ¦ Mixing flammable non-food substances may be hazardous. ¦ Do not operate this appliance in the presence of explosive and/or flammable fumes. ¦ This appliance is intended for household use only and not for commercial or industrial use. 2 ¦ Do not abuse the cord. Never carry the mixer by the cord or yank it to disconnect from an outlet; instead, grasp the plug firmly and pull to disconnect. SAVE THESE INSTRUCTIONS POLARIZED PLUG This appliance has a polarized plug—one blade is wider than the other. To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse it. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature by modifying the plug in any way. Beater Eject Button Beater Clips Spatula Attachment Beaters Heel Rest Speed Control Switch M24S Shown 3 How To Use Figure A INSERTING AND REMOVING BEATERS 1. Move the Speed Control to the Off position and unplug the cord from the outlet before inserting or removing the Beaters. 2. Insert the Beaters by gripping the Mixer handle with one hand and the Beater Stem with the other hand. Insert the Beater Stem into one opening, rotating slightly until it locks into place. (Figure A) Repeat to attach the other Beater. 3. Remove the Beaters by gripping the Mixer handle and pressing the Beater Eject Button. USING THE MIXER 1. Move the Speed Control Switch to the Off position and attach the Beaters. Then, plug the cord into a standard electrical outlet. 2. Place the ingredients in a bowl, grip the Mixer handle, and stand the Beaters in the center of the food to be mixed. 3. Start mixing at the lowest speed and gradually increase to the desired speed. (See “Mixing Guide” pages 6 & 7.) 4. Guide the Beaters continuously through the mixture for uniform mixing. To scrape the sides and bottom of 4 Figure B the bowl when using a handheld utensil, move the Speed Control to the Off position and place the Mixer on its Heel Rest so the Beaters can drain into the bowl. (Figure B) 5. When mixing has been completed, move the Speed Control to the Off position, unplug the cord, and eject the Beaters. USING THE SPATULA ATTACHMENT The Spatula Attachment can be used during some mixing tasks to help scrape the bowl sides and blend ingredients back into the batter. It is designed for use when mixing thin (puddings, pancake mix) to medium batters (cake mixes, muffins, frostings) and for mashing potatoes. The use of the Spatula Attachment is not recommended when beating egg whites, whipping cream, or when mixing thick cookie dough. 1. Be sure the Mixer is unplugged from the electrical outlet and the Speed Control Switch is in the Off position. Insert the Beaters into the Mixer. (See page 4) 2. Place the Mixer on a flat surface with the Beaters facing forward. The Spatula Attachment should be positioned so the Spatula is to the right of the Beaters. 3. Weave the top of the Spatula Attachment under the left Beater shaft and over the right Beater shaft. The word “Front” on the Attachment should face 5 Figure C outward from the front of the Mixer. (Figure C) Snap the Attachment onto the Beater shafts. 4. As you mix, place the front edge of the Spatula Attachment against the side of the bowl and move it forward slowly along the side to scrape away dry ingredients and batter buildup. NOTE: Should the Spatula Attachment become detached during use, be sure to move the Speed Control to the Off position before attempting to reattach the Spatula to the Beaters. SELECTING MIXING SPEEDS Refer to the following Mixing Guide for speed applications. You may also refer to the Tips for suggested speeds and mixing times. Ingredient variations and individual preferences may require changes in speeds and times. If your Mixer slows down excessively, switch to the next higher speed or divide the quantity being mixed. MODEL M24S MIXING GUIDE (3-SPEEDS) Use WHIP To beat eggs (white, yolks, whole...
Questo manuale è adatto anche per i modelli :Mixer - M24S (114.38 kb)