Log:
Scaricare : 5   File Size : 13 mb   Produttore : Hobart  
Categoria : Mixer
@name@name@name

1 8 Standard Timer Controls 6.2 9 Recipe Timer Controls 6.2 10 Bowl Placement 6.3 11 Agitator 6.4 11 Prepare for Mixing 6.5 12 Operating Notes 6.6 12 Standard Timer Operation 6.7 12 Recipe Timer Operation 6.7 14 View Recipe 6.7 15 Programming Recipe Timer 6.7 15 Unloading 6.8 17 Guard Wire Cage 6.9 17 Remove and Cleaning the Guard Wire Cage 6.10 18 Re-Fitting the Guard Wire Cage 6.11 18 Mixing Capacity Chart 6.12 19 Agitators and Attachments 6.13 21 2 Using the Attachment Facility Using the Atta

Scaricare : 3   File Size : 9 mb   Produttore : Hobart  
Categoria : Mixer
@name

3. Lower the front of the wire cage and move the wire cage slightly to the rear so the rear retainer shoes clear the ridge of the drip cup. The wire cage can now be removed. Fig. 6 4. Wash the wire cage in a sink, rinse with clear water, and dry with a clean cloth. 5. The stainless steel splash guard can be wiped off and/or washed with a cloth or sponge using warm, soapy water. Rinse with clear water and dry with a clean cloth. Reinstall Wire Cage 1. Position the ring of the wire cage so the fro

Scaricare : 7   File Size : 8 mb   Produttore : Hobart  
Categoria : Mixer
@name

Buzzer sounds and display will show recipe number that was programmed with the number blinking. 13.Press PGM to enter run mode. (Buzzer sounds) 14.Press STD to return to standard mode or set recipe selector to the desired recipe. 15.Select the recipe that you programmed and verify proper operation. UNLOADING1.Openthe bowl guard wirecageassembly. 2.Lower bowl support. 3.Removethe agitator from the agitatorshaft. 4. Slightlyliftthe bowloff thepin (rightside),pullbowl to the frontand removefrom the

Scaricare : 2   File Size : 8 mb   Produttore : Hobart  
Categoria : Mixer
@name

2TABLE OF CONTENTS GENERAL...............................................................................................3 INSTALLATION...............................................................................................3 Unpacking.............................................................................................3 Location................................................................................................3 Electrical Connections....................................

Scaricare : 2   File Size : 8 mb   Produttore : Hobart  
Categoria : Mixer
@name

The Legacy 20-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl lift and a #12 attachment hub as standard equipment. With the use of special agitators, a 12 quart bowl may be used on the HL200 mixer. A variety of attachments, agitators and accessories are available. These are described in a separateUse and Applications Handbook, which is furnished on the Legacy Mixer Operator Training CD provided with each mixer. INSTALLATIONUNPACKING Immediately after unpacking the m

Scaricare : 2   File Size : 8 mb   Produttore : Hobart  
Categoria : Mixer
@name

c.If the timeischanged while mixing,the mixerwill operate until the new time expires. The adjustment to the timewillnot be stored. d. If speedis changed whilemixing, the time will change to the previous time for theselected speed and count down. NOTE:If the wire cage is opened at any time, the mixing operationwill stop. To resume the mixingoperation, close the wire cage andpress theSTARTbutton. 3. Whenthe timer reaches 00:00, themixerstops;a beeper sounds for 1 second.The count- down timer then

Scaricare : 8   File Size : 7 mb   Produttore : Hobart  
Categoria : Mixer
@name

5. When the timer reaches the end of the last programmed recipe step, the mixer stops; the beeper sounds; the selected recipe is displayed. View Recipe When the mixer is in RECIPE mode, you can view the step settings of any recipe. 1. Press the SELECT/SAVE button. A. Display will alternate between speed and time. B. The LED of the step being displayed will flash. 2. Use the arrow buttons to view the next step. 3. Use the Recipe selector to view other recipes. 4. Press PGM button to return to the

Scaricare : 14   File Size : 7 mb   Produttore : Hobart  
Categoria : Mixer
@name@name@name

1 8 Standard Timer Controls 6.2 9 Recipe Timer Controls 6.2 10 Bowl Placement 6.3 10 Agitator 6.4 11 Hold to run operation 6.5 11 Power bowl lift 6.6 12 Prepare for Mixing 6.7 12 Operating Notes 6.8 13 Timer Operation 6.9 13 Recipe Mode – To enter and Exit 6.9 15 Reviewing Recipe Steps 6.9 15 Running a Recipe 6.9 16 Interrupting a Recipe 6.9 16 Entering a Special Fun 6.9 17 Enter The Access Code et…rECP] 6.9 17 Programming a Recipe [S 6.9 18 Programming a Pause or Inactive [Atth…rECP] 6.9 18 Mak

Scaricare : 7   File Size : 4 mb   Produttore : Hobart  
Categoria : Mixer
@name

B (May 2007) Installation, Operation and Care of Model HCM450 Cutter Mixer SAVE THESE INSTRUCTIONS GENERAL The HCM450 Cutter Mixer cuts, mixes or blends foods quickly and efficiently. A transparent lid allows the operator to inspect the product during the mix-cut-blend process. The unit operates continuously, momentarily or with a timer control which shutsoff the machine automatically after the set time has elapsed. The HCM450 bowl has a liquid capacity of 45 quarts. The motor on HCM450 is rated

Scaricare : 14   File Size : 3 mb   Produttore : Hobart  
Categoria : Mixer
@name

RIDGE AVENUE • TROY, OHIO 45374-0001 • 937-332-3000 • WWW.HOBARTCORP.COM IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against the risk of electrical shock, do not put mixer in water or other liquid. 3. Close supervision is necessary when this or any appliance is used by or near children. 4. Unplug mixer from outlet when not in use, before putting on or taking off





categorie