valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Operating pressure Water volume Detergent suction Engine 2600 PSI 2.6 GPM 0.24 GPM 6.0 HP Robin/Subaru Part No. Serial No. 1.194-506 Karcher Customer Support USA Call: 1-800-537-4129 for help or visit ourwebsite: Karcher Customer Service CDN Call: 1-800-465-4980 for help or visit ourwebsite: Model G 2600 OR OVERVIEW Item Description 1 Handle 2 Triggergun 3 Trigger gun safety lock 4 Detergent suction tube 5 Detergent filter 6 High pressure outlet 7 Water inlet with garden hose connector 8 High pressure hose 9 Spray wand 10 Oil reservoir 11 Pull start 12 Gas tank 13 Hose Reel (optional) Mounting Holes Not pictured Quick connect nozzles (Red, Green, Yellow, Black) Caution • Followthe maintenance instructions specified in the manual. • This machine has been designed for use with cleaning detergents by the manufacturer. The use of other cleaning detergents may affect the operation ofthe machine and void the warranty. IMPORTANT PRECAUTIONS - Read First! IMPORTANT SAFETY INSTRUCTIONS WARNING - When using this product basic precautions should always be followed, including the following: WARNING - Risk of Injection or Injury - Do Not Direct Discharge Stream At Persons. • Read all the instructions before using the product. • Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks. • Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc. • High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, orthe machine itself. • Wearsafetygoggles. • Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. • The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and awayfrom children. • Do not allow the high pressure hose to come into contact with the muffler guard. • Do not leave the machine running unattended. • Learn how to stop the machine and release pressure quickly. Be thoroughly fa-miliarwith the controls. • Stayalert — watchwhatyouaredoing. • Do not operate the product when fatigued or under the influence of alcohol or drugs. • Do not stand on unstable surfaces. Stand with both feet balanced at all times. • Avoid tipping the machine on its side. The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Do not spray electrical connections, electrical outlets orfixtures. Do not touch hot surfaces or allow accessories to contact hot surfaces. Do not operate in an enclosed space, exhaust fumes are dangerous. Do not operate near utilities with open flames. Do not operate pressure washer without the waterturned on. Do not use hot water. WATER SUPPLY (Cold Water Only) • Water hose must be at least 5/8 inch in diameter. • Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). • Flow rate can be determined by running the waterfor one minute into an empty 5-gallon container. • The water supply temperature must not exceed 104oF/40oC. • Never use the pressure washer to draw in water contaminated with solvents, e.g. paintthinners, gasoline, oil, etc. • Always prevent debris from being drawn into the unit by using a clean water source. We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged. - SAVE THESE INSTRUCTIONS - ASSEMBLY INSTRUCTIONS Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. Step 2 Attach the gun/hose storage handle. Step 3 Place the quick connect nozzles in the nozzle holder. Step 4 Attach the wand to the spray gun. Step 5 Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle. Step 6 Release the collar and push the nozzle until the collar clicks. DANGER High pressure in nozzle area. Risk of injury caused by improper locked nozzle. • Make sure you hear a 'click' when inserting the nozzle tip into the wand. • Pull the nozzle to make sure it is seated properly before operating your unit. Step 7 Attach the high pressure hose to the spray gun. Step 8 Prior to initial startup, cut off tip of oil reservoir cap. OPERATING INSTRUCTIONS Important! Do not run the engine with a high or low oil level as this can cause engine damage. If you have further questions regarding the engine, please refer to the engine’s operating manual included with the unit. Step 1 Check oil level. Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking t...