valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. • The Picture menu changes depending on the input signal and Edit Name. Adjusting the LCD Display Picture [PC / DVI / BNC / MagicInfo Mode] Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • The BNC mode will not be activated on the DXN-2 model. • MagicInfo supports the DXN-2 model only. MagicBright MENU > > ENTER > > ENTER > > , > ENTER MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. (Not available when Dynamic Contrast is set to On.) 1. Entertain High brightness For watching motion pictures such as from a DVD or VCR. 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. 3. Text Normal brightness For documents or works involving heavy text. 4. Custom Adjusting the LCD Display Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU > > ENTER > > > ENTER > (Not available when Dynamic Contrast is set to On.) Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Contrast MENU > > ENTER > > > ENTER > > ENTER> > , > ENTER Adjusts the Contrast. Brightness MENU > > ENTER > > > ENTER > > > ENTER > > , > ENTER Adjusts the Brightness. Sharpness MENU > > ENTER > > > ENTER > > > > ENTER > > , > ENTER Adjusts the Sharpness. Color Tone MENU > > ENTER > > > >ENTER > Adjusting the LCD Display > , > ENTER The color tones can be changed. (Not available when Dynamic Contrast is set to On.) 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled. If you set the Color Tone to Off, the Color Control function is disabled Color Control Adjusts individual Red, Green, Blue color balance. MENU > > ENTER > > > > > ENTER > (Not available when Dynamic Contrast is set to On.) Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. Red MENU > > ENTER > > > > > ENTER > > ENTER > > , > ENTER Green MENU > > ENTER > > > > > ENTER > > > ENTER > > , > ENTER Blue MENU > > ENTER > > > > > ENTER > > > > ENTER > Adjusting the LCD Display > , > ENTER Color Temp. MENU > > ENTER > > > > > > ENTER > > , > ENTER Color Temp. is a measure of the 'warmth' of the image colors. (Not available when Dynamic Contrast is set to On.) Note This function is only enabled if the Color Tone is set to Off. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates un stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC mode only) MENU > > ENTER > > > > > > > ENTER > Coarse MENU > > ENTER > > > > > > > ENTER > > ENTER > > , > ENTER Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU > > ENTER > > > >>> > ENTER > > > ENTER > > , > ENTER Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). Position MENU > > ENTER > > > > > > > ENTER > > > > ENTER > Adjusting the LCD Display > , , , > ENTER Adjusts the screen location horizontally and vertically. Auto Adjustment MENU > > ENTER > > > > > > > > ENTER > The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC mode only) Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. MENU > > ENTER > > > > > > > > > ENTER > (Available in PC mode only) Signal Balance MENU > > ENTER > > > > > > > > > ENTER > > ENTER > > , > ENTER Selects either On or Off with the signal control. Signal Control MENU > > ENTER > > > > > > >> > ENTER > > ENTER > > 1. R-Gain Adjusting the LCD Display MENU > > ENTER > > > > > > > > > ENTER > > ENTER > > > ENTER > > , > ENTER 2. G-Gain MENU > > ENTER > > ENTER > > > > > > > > > > ENTER> > > ENTER > > , > ENTER 3. B-Gain MENU > >ENTER > > > > > > > > >ENTER > > ENTER > > > > > ENTER> > , > ENTER 4. R-Offset MENU > >ENTER > > > > > > > > >ENTER > > ENTER > > > > > > ENTER> > , > ENTER 5. G-Offset M...
Questo manuale è adatto anche per i modelli :Monitor - 400DX-2 (5.23 mb)
Monitor - 460DX-2 (5.23 mb)
Monitor - 460DXN-2 (5.23 mb)