valutazioni - 2, GPA: 5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
By changing the resolution in the control panel, the auto function is performed. Adjusting the LCD Display (Available in PC mode only) Note The direct button on the remote control is the 'AUTO' button. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. MENU > > ENTER > [Picture] > > > > > > > ENTER > [Signal Balance] (Available in PC mode only) Signal Balance MENU > > ENTER > [Picture] > > > > > > > ENTER > [Signal Balance] > ENTER > [Signal Balance] > , > ENTER Selects either On or Off with the signal control. Signal Control MENU > > ENTER > [Picture] > > > > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] 1. R-Gain MENU >>ENTER >[Picture] >>>>>>>ENTER >[Signal Balance] >> ENTER > [Signal Control] > ENTER > [R-Gain] >, > ENTER 2. G-Gain MENU >>ENTER >[Picture] >>>>>>>ENTER >[Signal Balance] >>ENTER >[Signal Control] >>ENTER>[G-Gain] >, >ENTER 3. B-Gain MENU > > ENTER > [Picture] > > > > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] > > > ENTER> [B-Gain] > , > ENTER Adjusting the LCD Display 4. R-Offset MENU > > ENTER > [Picture] > > > Balance] > > ENTER > [Signal Control] > > > ENTER > > > > > ENTER > [Signal > ENTER> [R-Offset] > , 5. G-Offset MENU > > ENTER > [Picture] > > Balance] > > ENTER > [Signal Control]> > , > ENTER > > > > > > > ENTER > [Signal > > ENTER > [G-Offset] 6. B-Offset MENU > > ENTER > [Picture] > > > > > > Balance] > > ENTER > [Signal Control] > > > > Offset] > , > ENTER > ENTER > [Signal > > ENTER > [B- Size MENU > > ENTER > [Picture] > > > > >> > > ENTER > [Size] > , > ENTER The Size can be switched. 1. 16:9 2. 4:3 Dynamic Contrast MENU > > ENTER > [Picture] > > > >>>>>> ENTER > [Dynamic Contrast ] Adjusting the LCD Display > , > ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Brightness Sensor MENU > > ENTER > [Picture] > > > > > > > > >> ENTER > [Brightness Sensor ] > , >ENTER Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness. 1. Off 2. On Picture [ AV / HDMI / TV / Component Mode] Available Modes • PC / BNC / DVI • AV • HDMI • MagicInfo • TV • Component Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed. Mode MENU > > ENTER > [Picture] > ENTER > [Mode] > , > ENTER Adjusting the LCD Display The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU > > ENTER > [Picture] > > ENTER > [Custom] Contrast MENU > > ENTER > [Picture] > > ENTER > [Custom] > ENTER> [Contrast] > , > ENTER Adjusts the Contrast. Brightness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > ENTER > [Brightness] >, > ENTER Adjusts the Brightness. Sharpness MENU >>ENTER >[Picture] >>ENTER >[Custom] >>>ENTER > [Sharpness] >, > ENTER Adjusts the picture Sharpness. Color MENU > > ENTER > [Picture] > > ENTER > [Custom] >>>> ENTER > [Color] > , > ENTER Adjusting the LCD Display Adjusts the picture Color. Tint MENU > > ENTER > [Picture] > > ENTER > [Custom] > > >>> ENTER > [Tint] > , > ENTER Adds a natural tone to the display. Note Tint function can be available just in NTSC system. Color Tone MENU > > ENTER > [Picture] > > > ENTER > [Color Tone] > , > ENTER The color tones can be changed. The individual Color components are also user adjustable. 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp function is disabled. Color Temp. MENU > >ENTER >[Picture] > >>>ENTER > [Color Temp.] > , >ENTER Color temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. Adjusting the LCD Display Size MENU > > ENTER > [Picture] > > > >> ENTER > [Size] > , > ENTER The Size can be switched. 1. 16:9 - Sets the picture to 16:9 wide mode. 2. Zoom 1 - Magnifies the size of the picture on the screen. 3. Zoom 2 - Magnifies the size of the picture more than “Zoom 1”. 4. 4:3 - Sets the picture to 4:3 normal mode. 5. Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input. Note Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature. ZOOM1, ZOOM2 will be unavailabel in HDMI mode. The Position and Reset functions are available when ZOOM1 or ZOOM2 is run. Digital NR (Digital Noise Reduction) MENU > > ENTER > [Picture] > > > >>> ENTER > [Digital NR] > , > ENTER Turns the Digital Noise Reduction feature Off/On. The ...
Questo manuale è adatto anche per i modelli :Monitor - 520DXN (4.4 mb)