valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
If mounting the display onto a wall, you can move the function knob to the side of the display. O Remote Control Sensor Aim the remote control towards this spot on the LCD Display. 0 Light sensor Introduction Automatically detects the intensity of ambient light around a selected display and adjusts the screen brightness. ©Note It works when you use the MDC program. 0 Power indicator Shows mode by blinking green ©Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. O POWER button Use this button for turning the LCD Display on and off. 0 SOURCE button Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [PC] ^ [DVI] ^ [AV] ^ [Component] ^ [HDMI1] ^ [HDMI2] ^ [DisplayPort] —> [Magiclnfo] —> [TV] ©Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • MagicInfo can only be enabled when a network box is connected. Default location of the function knob on the display upon purchase Attaching the knob to the side Introduction Attaching the function knob to the display • The function knob can be attached to any screw hole on the display. • Align the screw holes of the display and function knob. Next, fasten using the screw. Note Using a screw other than the one supplied can damage the display. Detaching the function knob Rear Hold the area marked in the picture. Note Push the areas marked. Hold the areas marked, and lift the function knob. See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model. IR OUT Receives a signal from the remote control and outputs the signal through Loopout when a removable sensor board is connected. © CONTROL IN Connects to the function (Power/Source) control buttons and receives the light sensor signal and remote control's IR signal. 0 DVI OUT (LOOPOUT) Introduction • Connect a monitor to another monitor through a DVI, DVI to HDMI cable. • Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [DVI IN] or [HDMI IN] on another monitor. • HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are displayed on the second display which has the [DVI IN] port. ^ Note • The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another display. • A maximum of 100 monitors can be connected to DVI-Loopout (using a 2m-long DVI cable). Up to HD resolution can be supported. Compatible input sources include DVI IN, HDMI IN 1, and HDMI IN 2 (MagicInfo). • The status of the cable may have a great effect on the Loopout performance. RGB/COMPONENT IN (PC/COMPONENT mection Terminal (Input)) Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable. Connect the [RGB/COMPONENT IN] port on the monitor to the COMPONENT port on the external device using the RGB to COMPONENT cable. Connect the [RGB/COMPONENT IN] port on the monitor to the BNC port on the PC using the RGB to BNC cable. DVIIN (PC Video Connection Terminal) Connect the [DVIIN] port on the monitor to the DVI port on the PC using the DVI cable. 0 RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/ DP/HDMI Audio Connection Terminal (Input)) Connect the [RGB/DVI/DP/HDMI AUDIO IN] terminal of the monitor and the speaker output terminal of your computer's sound card using a stereo cable (sold separately). DP IN Introduction Receives a signal from the Display port. Connect a DP cable to [DP IN] on the product and DP IN on another display. AV/COMPONENT AUDIO IN [R-AUDIO-L] Connect the [AV/COMPONENTAUDIO IN[R-AUDIO-L]] port on the monitor to the audio output port on the PC or on the external device using an audio cable. 0 AV IN Connect the [AV IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. O AUDIO OUT Connect a headphone or an External speaker. © DC OUT Make sure to use connecting [DC OUT] terminal to the authorized TV-Tuner Box. (US Only) ' Otherwise, this may result in damage to the product. O HDMI IN 1 • Connect the [HDMI IN 1] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. ^ Note • A normal external device (DVD player or camcorder, etc.) or a TV tuner box (US Only) can be connected to the [HDMI IN 1] terminal. • To use a TV tuner box (US Only), make sure to connect it to the [HDMI IN 1] terminal. © HDMI IN 2 (MAGICINFO) • Connect the [HDMI IN 2 (MAGICINFO)] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. Introduction o • Up to HDMI 1.3 can be supported. Note The MAGICINFO OUT port must be ...
Questo manuale è adatto anche per i modelli :Monitor - UD55A (4.84 mb)