valutazioni - 4, GPA: 3.8
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. • This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. • This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. • An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. • This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. • This may cause a fire. Installation Put your monitor in a location with low humidity and a minimum of dust. • An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. • This may cause damage to the product or human body. Place the monitor on a flat and stable surface. • The monitor can cause injury by falling. Set down the monitor carefully. • It could be damaged or broken. Do not place the monitor face down. • The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. • Installation by unqualified personnel may result in injury. • Always use the mounting device specified in the owner's manual. Leave a space for ventilation between the product and the wall. • Poor ventilation may cause the interior temperature to rise and lead to a fire. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly on the monitor. • This may cause damage, electric shock or a fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Contact a Service Center or Customer Center for interior cleaning once a year. • Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or a fire. Other Do not remove cover (or back). No user serviceable parts inside. • This may cause an electric shock or a fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Be careful not to let water drip into the monitor or expose the monitor to moisture. • This may cause malfunction, an electric shock or a fire. • Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. • The monitor may malfunction, causing an electric shock or a fire. • Then contact the Service Center . Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. • Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. • This may cause malfunction, an electric shock or a fire. • If a foreign substance enters the monitor, unplug the power cord and contact the Service Center . Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Do not insert metal objects such as utensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. • This may cause malfunction, an electric shock or a fire. • Always contact the Service Center if foreign substances/objects enter into the monitor. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. • Inappropriate resolution may cause undesirable picture quality. 15 inch - 1024 X 768 17,19 inch - 1280 X 1024 Sitting too close to the monitor on a continuous basis may damage eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it can be exposed to strong vibrations. • Ex...
Questo manuale è adatto anche per i modelli :Monitor - 701T (3.59 mb)
Monitor - 710N (3.59 mb)
Monitor - 710T (3.59 mb)
Monitor - 711T (3.59 mb)