valutazioni - 5, GPA: 3.6
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes). Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes. ( The maximum frequency per resolution may differ from product to product. ) Windows XP : Set the resolution at the Control Panel > Appearance and Themes > Display > Settings. Windows ME/2000 : Set the resolution at the Control Panel > Display > Settings. Set the video card by referring to the video card manual. Install the monitor driver according to the Driver Installation Instructions. Install the monitor driver according to the Driver Installation Instructions. Check when MagicTune™ does not function properly. MagicTune™ doesn't work properly. MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play. Have you changed your PC or video graphic card? * To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows™ is XP); Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Monitors > After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. Download the latest program. The program can be downloaded Visit the MagicTune™ website and download the installation software for MagicTune™ MAC. Check the following items if there is trouble with the monitor. Symptom The screen does not appear when I switch to the Client Mode. The client screen appears, but I cannot connect to the server. I cannot access the Internet in the Client screen. The contents (video, voice) on the server do not play smoothly on the Client Monitor. I have connected a digital device such as a digital camera, camcorder or USB memory to the USB port, but they do not work. The file list does not appear. Solutions To use the network function, approximately 30 seconds of booting time is required after turning the power on, and a blank screen appears for 3 to 4 seconds during booting. Please switch the mode about 30 seconds after the power is turned on. 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not, that indicates that the LAN connection is disconnected. In this case, connect using another LAN cable. 2) Check if the settings of the 'Settings', 'Network' tab are properly set up. The default setting is "DHCP". If your network uses a static IP address, select 'Use the following IP address' and then enter the appropriate IP address information. 3) Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of 'Settings' are the same as those of the host PC. If not, match the 'User Name' and 'Password' of the 'Remote Desktop' with those of the host PC. 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not, that indicates that the LAN connection is disconnected. In this case, connect using another LAN cable. 2) Check if the settings of the 'Network' tab of 'Settings' have been properly set up. The default setting is "DHCP". If your network uses a static IP address, select 'Use the following IP address' and then enter the appropriate IP address information. This is because the data is transmitted over the LAN. Check your LAN connection status. This model supports USB devices that support removable disk functions without an additional driver installation. Check if the device you want to connect to is a device that supports the removable disk function without an additional driver installation. 1) Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG) exist, the files do not appear on the screen. 2) The time required to display is determined by the size of the file. Wait a moment. 3) Check if the format of the file is supported by the Client Monitor. If the extension of the file has been changed, the file will not be played. Check the following items if there is trouble with the monitor. Check if the power cord and the video cables are properly connected to the computer. Check if the computer beeps more than 3 times when booting. (If it does, request an a service for the main board of the computer.) If you installed a new video card or if you assembled the PC, check if the installed the adaptor(video) driver and the monitor driver. Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.) If you have problems in installing the adaptor (video) driver, boot the computer in Safe Mode, remove the Display adaptor at the "Control Panel > System > Device Administrator" and then reboot the computer to reinstall the adaptor (video) driver. If problems repeatedly occur, contact an authorized ...