valutazioni - 4, GPA: 4.3
(
)
)
|
Foto e specifiche LG E1942CW |
Facilità d'uso
If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. 0 note- • The accessories supplied with your product may vary depending on the model. • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ENGLISH ENGLISH 4 ASSEMBLING AND PREPARING Parts and buttons Power Indicator • Lighting On: Turned on • Lighting Off: Turned off (!) (Power Button) Button (See p.11) Connection panel (See p.9) ASSEMBLING AND PREPARING 5 setting up the Monitor set Attaching the stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. ■A caution Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 0 Attach the stand Body to the monitor set. ^ Attach the stand Base. ^ Tighten the screw to the right with a coin. Detaching the stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 0 Pull out the stand Body and stand Base from the monitor set. ^ Turn the screw to the left with a coin. ^ Pull out the stand Base. p/j\ caution- • This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. • Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. ENGLISH ENGLISH 6 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (i)(Power) button on the bottom switch panel to turn the power on. r/j\ caution- Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Using the cable holder ASSEMBLING AND PREPARING 7 warning When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, fingers. as may injure your Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. r © note- The Kensington security system is optional. You can obtain it from most electronics stores. o note Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. -5° 20° Front Rear ENGLISH ENGLISH 8 ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. • 784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : O 4.0 mm x Pitch 0.7 mm x Length 10 mm • 787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. Model E1942CW E1945CW VEsA (A x B) 75 x 75 standard screw M4 Number of screws 4 r/j\ caution- • Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. • If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. • Use only an authorized LG wall mount and contact the local dealer or qualified personnel. • Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. • Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. r© note- • Use the screws that are listed on the VESA standard screw specifications. • The wall mount kit will include an installation manual and necessary parts. • The wall mount bracket is optional. You can obtain additional accessories from your local dealer. • ...
Questo manuale è adatto anche per i modelli :Monitor - E1942CW-BN (2.48 mb)
Monitor - E1945CW-PN (2.48 mb)