valutazioni - 1, GPA: 5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect Troubleshooting The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Display image is incorrect Troubleshooting The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. 21 22 47.0 cm : NOTE Information in this document is subject to change without notice. < < DDC 2B (Analog,Digital) Specifications E1941S Specifications E1941S 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 61 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync. Sync Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Video Input Max VESA 1366 x 768 @60 Hz Recommend VESA 1366 x 768 @60 HzResolution Plug&Play On Mode : 18 W(Typ.) Sleep Mode 0.3 W Off Mode 0.3 W Power Consumption With Stand Width 44.30 cm (17.44 inch) Height 35.00 cm (13.78 inch) Depth 16.60 cm ( 6.54 inch) Weight(excl. packing) 2.4 kg (5.29 lb) Dimensions & Weight Tilt : -5. to 15.Range DDC2B Without Stand Width 44.30 cm (17.44 inch) Height 28.50 cm (11.22 inch) Depth 5.5 cm ( 2.16 inch) < < Power Input Operating ConditionsTemperature 10 .C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 .C to 60 ....
Questo manuale è adatto anche per i modelli :Monitor - E1941S-BN (4.88 mb)
Monitor - E1941T-BN (4.88 mb)
Monitor - E2041S (4.88 mb)
Monitor - E2041S-BN (4.88 mb)