valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. . Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. A17 Troubleshooting Display image is incorrect . The screen color is mono or abnormal. . The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Have you installed the display driver? . Have you installed the display driver? . Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. A18 Specifications L1742P/L1742PQ A19 NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Signal cable Power cord 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 43.2 cm 0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B (Digital), DDC 2AB (Analog) On Mode : 30 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Without Stand Width 36.96 cm / 14.55 inches 36.96 cm / 14.55 inches Height 40.83 cm / 16.07 inches 31.51 cm / 12.41 inches 51.83 cm / 20.41 inches Depth 24.16 cm / 9.51 inches 5.60 cm / 2.20 inches Net 3.83 kg (8.51 lbs) Tilt -6.~17. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type Specifications L1742PP A20 NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Signal cable Power cord 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 43.2 cm 0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B (Digital), DDC 2AB (Analog) On Mode : 30 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Without Stand Width 36.96 cm / 14.55 inches 36.96 cm / 14.55 inches Height 40.83 cm / 16.07 inches 31.51 cm / 12.41 inches 51.83 cm / 20.41 inches Depth 24.16 cm / 9.51 inches 5.60 cm / 2.20 inches Net 4.16 kg (9.24 lbs) Tilt -6.~17. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type A21 Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Signal cable Power cord 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diag...
Questo manuale è adatto anche per i modelli :Monitor - L1942P-BF (701.71 kb)