valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Be careful when adjusting the stand angle. • Applying too much force may cause the monitor topple over or fall, resulting in injury. • Your hand or finger(s) may get caught between the monitor and the stand, causing injury. Adjust the resolution and frequency to the levels appropriate for the model. • Inappropriate resolution may cause undesirable picture quality. 17 inch - 1280 X 1024 Keep a proper distance between your eyes and the monitor screen. • Sitting too close to the monitor on a continuous basis may damage eyesight. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor. • Failure to disconnect a cable may damage it and lead to a fire or an electric shock. Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Front Rear Signal Cable(15 pin D-Sub) Power Cord Monitor User's Guide and Natural Color/ Warranty Card Driver Installation CD (Not available in all locations) Quick Setup Guide Unpacking Front Rear Unpacking Front Rear Use this button to turn the monitor on and off. This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Use this button to auto adjustment direct access./Use this button to Exit the active menu or the OSD. Use this button to open the OSD and activate a highlighted menu item. These buttons allow you to highlight and adjust items in the menu. 1. Power button 2. Power indicator 3. Auto/Exit button 4. Menu button 5. Adjust buttons Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Unpacking Front Rear Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Touchscreen cable Connect the touchscreen cable to an available serial communication (COM) port on the back of your computer. Note: See Connecting Your Monitor for further information regarding cable connections. Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Connecting Your Monitor Installing the Monitor Driver Installing a VESA base 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the touchscreen cable to an available serial communication (COM) port on the back of your computer. • If the COM port has a 9-pin connector, attach the touchscreen cable directly to the port. • If the COM port has a 25-pin connector, first attach a 9-pin to 25-pin adapter (not included) to the end of the touchscreen cable, and then attach the cable to the port. 4. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 5. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor. 6. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Automatic Manual When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Automatic Manual When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Connecting Your Monitor Installing the Monitor Driver Installing a VESA base • Internet web site : (Worldwide) (USA) (Korea) (China) Windows ME | Windows XP/2000 1. Windows ME Refer to "Installing the Monitor Driver and User Manual" CD-ROM supplied with the monitor. When inserted into the computer CD drive, the CD-ROM boots up automatically. If it fails to boot up automatically, click monsetup.exe twice in the CD-ROM drive folder of Windows Explorer. 1. Insert CD into the CD-ROM driver. 2. Click "Windows ME Driver" 4. Click the "Install" button in the "Warning" window. 3. Choose your monitor model in the model list, then click the "OK" button....