valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
-Settings can be adjusted and stored for each external device you have connected to an input of the TV. Backlight Adjust the screen brightness by adjusting the LCD backlight. Adjusting the Monitor Size You can switch the Size. The direct button on the remote control is 'P.SIZE' button. Auto Wide - Automatically adjusts the picture size to the "16:9" aspect ratio. Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. 16:9 - Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom - Magnify the size of the picture more than 4:3. (Move the screen up/donw using the or button after selecting the by pressing the or ENTER button.) Zoom - Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. (Select by pressing the or button. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.) 4:3 - Sets the picture to 4:3 normal mode. Just Scan - Use the function to see the full image without any cut off when HDMI (480i / 1080i), Component (480i / 1080i) or DTV(480i / 1080i) signals are input. (Just Scan are only operated in HDMI mode.) Screen Mode Adjusting the Monitor Only when setting the picture size to Auto Wide can the user determine the Screen mode. Each individual European country requires a different picture size so this function is intended to help users to select it. -‘Screen mode’ is supported in TV, Ext., Component (480i/1080i) and HDMI (480i/1080i) -Picture Size is available in Auto Wide mode -This function is not available in PC or Component,Ext., HDMI mode. Wide / 16:9 / Wide Zoom/ Zoom / 4:3 Digital NR Digital Noise Reduction. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Off - Turns the screen noise reduction function off. Low - Reduces screen noise at a low level. Medium - Reduces screen noise at a medium level. High - Reduces screen noise at a high level. Auto - Automatically recognizes and reduces screen noise. Reset Adjusting the Monitor Picture parameters are replaced with the factory default values. • OK • Cancel Sound Available Modes • PC / DVI • TV • DTV • Ext. • Component • HDMI Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Mode The Monitor has a built-in high fidelity stereo amplifier. • Standard Choose Standard for the standard factory settings. • Music Choose Music when watching music videos or concerts. • Movie Choose Movie when viewing movies. • Speech Adjusting the Monitor Choose Speech when watching a show that is mostly dialogue (i.e., news). • Custom Choose Custom if you want to adjust the settings according to personal preference. Equalizer You can adjust the left and right sound balance and the low or high volume as you want. SRS TS XT You can experience sonorous and vivid sound, as if from 5.1 channel speakers. • Off • On Adjusting the Monitor Auto Volume Reduces the differences in volume level among broadcasters. • Off • On TV Speaker If you set this menu "On", sound output from the speakers is muted in case of using the home theater. • Off • On Channel Available Modes • TV Note The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Adjusting the Monitor Country Select the country in which the product is being used before you use the Auto Store feature. If you do not see your country in the list, select Others. Auto Store You can scan the frequency ranges available on your television in your area and store all the channels found automatically. Manual Store You can scan the frequency ranges available on your television in your area and store all the channels found manually. Adjusting the Monitor • Programme Inputting the appropriate program number on the screen. • Colour System Adjusts repeatedly until the colour is of the best quality. (Auto <-> PAL <-> SECAM <-> NTSC4.43 ) • Sound System Adjusts repeatedly until the sound is of the best quality. • Channel You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The Programme number of each stored channel which you wish to identify -C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. -S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. • Search The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. • Store It's used to restore the number user inputs. Channel Manager • Channel List You ca...
Questo manuale è adatto anche per i modelli :Monitor - T220HD (3.07 mb)