valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
4 Switch on the monitor . Switch your monitor on at the Standby/On switch on the front of the device. Finally, switch your computer on. DE EN FR ES DK NL 9 English The video workstation Please pay attention to the following: The monitor device should be set up so that mirror effects, fading and strong contrasts between light and dark are avoided (even if the view from the window is still so attractive!) (Ill.: Setting up of the monitor) (Ill.: Video workstation) . Surface supporting the hands: 5 - 10 cm . Highest monitor line at eye level or somewhat below it . Viewing distance: 40 to 70 cm . Leg-room (vertical): At least 65 cm . Leg-room (horizontal): At least 60 cm Bringing the device into operation Operating elements 1 2 3 4 5 6 (Ill.: Front operating elements) Ref. Button Description • You will start the OSD (On Screen Display) with this button. Press this button again if you wish to leave the OSD. + Power block, when the OSD is not activated + OSD block, when the OSD is not activated Hold the key combination until the bar displayed has moved from left to right completely, to activate/de-activate the block. A corresponding message will appear on the screen. DE EN FR ES DK NL • Select a parameter and reduce its value with this button, when the OSD is switched on. If you are not in the OSD: Direct call-up of the Contrast/Brightness menu. • Select a parameter and increase its value with this button, when the OSD is switched on. If you are not in the OSD: Direct call-up of the Contrast/Brightness menu. • Confirm the selection of the parameter to be changed with this button. If you are not in the OSD: Automatic adjustment • You can switch the TFT monitor on or to the Standby mode with this button. • Operational display Shows the operational state. Please also refer to page 13. 11 English Changing the parameters of the TFT monitor The On Screen Display (abbreviation: OSD) is a menu that is briefly faded in across the TFT monitor. You will be able to set certain parameters of the TFT monitor through the OSD menu. Operating the OSD menu 1. Press the button, in order to activate the OSD. 2. Select the options from the Main Menu with the function selection buttons. 3. Confirm your selection with the button. 4. Press the button, in order to leave the OSD. / Important! The OSD will be faded out automatically if you have not operated any button on the TFT monitor for the pre-set time. The OSD menu The main functions or possible settings through the OSD are explained in the following. (Ill.: OSD menu) Important! The menus described here can differ from those on your monitor because of possible technical changes. Changing the parameters of the TFT monitor DE EN FR ES DK NL Menu point Function / sub-menu Automatic adjustment: Sets the horizontal and vertical position, phase (fine tune) and clock cycle (H size) automatically. Contrast: Sets the white value of the monitor foreground. Brightness: To adjust the brightness of the video. DCR: You can switch the DCR function (dynamic contrast) on and off here. ECO: Turn ECO on and off. Contrast and brightness adjustment as well as DCR are deactivated in ECO mode. Important! The Standard setting must have been selected in the Picture Mode to be able to make Contrast and Brightness settings. Audio adjustment: For setting the audio function. Volume: Sets the sound output of the loudspeakers. Mute: Enables the selection between Mute On/Off. Colour settings: For the selection of the colours, in order to improve the brightness and the colour saturation. Selection can be made between: Cool, Normal, Warm and user-defined colours. Cool: Adds blue to the monitor, creating a cooler white. Normal: Adds red to the monitor, creating a warmer white and a brighter red. Warm: Adds green to the monitor, creating a darker colour tone. User colour: Individual settings for red(R), green(G) and blue(B). Information: Displays information about the current input signal of the graphics card of your computer. Manual image adjustment Horizontal size: Sets the width of the monitor. H./V. Position: Sets the horizontal and vertical position of the video image. Fine tune: Fine tune to improve the display of the TFT monitor. Sharpness: For the adjustment of the clarity in the case of a signal that does not correspond to the physical resolution of the screen. Video mode adjustment: change picture format. Picture Mode: This mode offers an optimum display environment according to the content displayed. Standard is suitable for all the general Windows environments and standard monitor settings. Game is optimum for PC or TV games. Video is optimum for replaying feature films and moving images. Landscape is optimum for displaying pictures of landscapes. Text is optimum for processing texts and text displays in a text processing environment. DE EN FR ES DK NL Menu point Function / sub-menu Automatic adjustment: Sets the horizontal and vertical position, phase (fine tune) and clock cycle (H size) automatically. Con...