valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
ScheduleToday12345762012 . 08 . 04THU20 : 19 : 55On _ : _ _ : _ _ Every dayOffInputWedSATMONTHUSUNTUEFRIEvery week4132 3. Press [] or [] button to select the schedule: 1 Power-on schedule: Press [] or [] button to set the hour and minute for the display to turn on. 2 Power-off schedule: Press [] or [] button to set the hour and minute for the display to turn off. Select or leave an empty “__” for both the hour and minute slot if you do not want to use this power-on or power-off schedule. 3 Input-source selection: Press [] or [] button to select an input source. If no input source is selected, the input source will remain the same as last selected. 4 Date schedule: Press [] button to select which day in a week this schedule item will be take effect, and then press the [SET] button. 4. For additional schedule settings, press [EXIT], then repeat the steps above. A check mark in the box next to the number of the schedule item indicates that the selected schedule is in effect. NOTES: • The {Every day} selection in a schedule item takes priority over the other weekly schedules. • If the schedules overlap, the scheduled power-on time takes priority over scheduled power-off time. • If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. For example, if schedule items #1 and #2 both set the display to power on at 7:00 AM and off at 5:00 PM, then only schedule item # 1 will take effect. Monitor ID Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number when multiple sets of this display are connected. Monitor ID number range is between 1 to 26. DDC/CI Choose to turn on or off the DDC/CI communication function. Select {On} for normal use. DDC/CI (Command Interface) specifies a means for a computer to send commands to the monitor, as well as receive sensor data from the monitor, over the bidirectional link such as DDC2Ab/Bi/B+. Specific commands to control monitors are defined in a separate Monitor Control Command Set (MCCS) standard. DDC/CI monitors are sometimes supplied with an external color sensor to allow automatic calibration of the monitor’s color balance. Some tilting DDC/CI monitors support an auto pivot function, where a rotation sensor in the monitor enables the operating system to keep the display upright as the monitor is moved between its portrait and landscape positions. The following DDC/CI commands should be supported via command line: No. Commands 1 Set Brightness 2 set Contrast 3 Set Red Gain 4 Set Green Gain 5 Set Blue Gain 6 Get Brightness 7 Get Contrast 8 Get Red Gain 9 Get Green Gain 10 Get Blue HDMI with One Wire CEC control. • {Off} - Disable CEC.(Default) • {On} - Enable CEC. Smart power Set the display to reduce the power consumption automatically. The options are: {Off} / {Medium} / {High}. Auto signal detection Choose to let the display detect and display available signal sources automatically. • {Of...