valutazioni - 3, GPA: 3.7 ( )

Produttore : Barco File Size : 803.83 kb File Nome : 6dd3349b-1ce2-46d6-ba38-ab7af77bbfbe.pdf Lingua di insegnamento:

. Power LED Green : Normal mode Amber: Standby mode Amber: Soft power-off . On-Screen Display (OSD) Function Button 1. POWER : Turns ON/OFF the monitor. 2. MENU : With OSD deactivated, Activate the OSD menu. With OSD activated, Exit from main menu or sub menu. 3. PIP : With OSD deactivated, Hot key of PIP mode. 4. UP : With OSD deactivated, Hot key of the brightness control and increases the brightness. With OSD activated, move the cursor upward. 5. DOWN : With OSD deactivated, Hot key of the brightness control and decreases the brightness. With OSD activated, move the cursor downward. 6. MINUS : With OSD deactivated, Hot key of the contrast control and decreases the contrast. With OSD activated, decreases the adjustment of the selected function. 7. PLUS : With OSD deactivated, Hot key of the contrast control and increase the contrast. With OSD activated, enter sub menu and increases the adjustment of the selected function. 8. INPUT : Change the display signal source. If VGA Analog's picture size not matched with full screen size or image is noisy press the input button during 2~3 seconds then you can see the most appropriate screen. Power management This monitor does not adhere to the VESA DPMS standard when no signal is present on the video inputs. Status LED sign Power Consumption Normal Mode Green on <260W Standby Mode Amber <17W Soft power-off Amber <14W On-Screen Display Menus Adjust BRIGHTNESS Increase or decrease the brightness. (Range : 0~100) CONTRAST Increase or decrease the Contrast. (Range : 0~100) SHARPNESS (1) Adjusts the sharpness of video image. (Range : 0~100) SHARPNESS (2) Adjusts the sharpness of video image. (SOFTEST, SOFT, NORMAL, SHARP, SHARPEST) COLOR (3) Changes the color value. (Range : 0~100) HUE (3) Changes the Hue. (Range : 0~100) BACKLIGHT Adjusts backlight dimming level. (Range : 0~100) PHASE (4) Adjust backlight dimming level. (Range : 0~100) FREQUENCY (4) Increase or decrease the sampling frequency. (Range : 0~100) AUTO ADJUST (5) Fit to the most appropriate screen on the VGA Analog signal (1): Available only for YPbPr, SVideo/CVideo input sources (2): Available only for VGA Analog/RGBS and DVI input sources (3): Not available for VGA Analog/RGBS and DVI input sources (4): Not available for DVI, SVideo/Cvideo and SDI input sources (5): Available only for VGA Analog/RGBS input sources Color temp MODE Change the color model. (6500K,Full white,Clearbase, USER) RED Red balance (Only Working with USER mode) (Range : 0~100) GREEN Green balance (Only Working with USER mode) (Range : 0~100) BLUE Blue balance (Only Working with USER mode) (Range : 0~100) Advanced SCALING Change the image size (Best Fit, Fit Width, Fit Height,Native,Full Display) H POSITION (6) Adjust the horizontal position of the displayed source image.(Range : 0~100) V POSITION (6) Adjust the vertical position of the displayed source image. (Range : 0~100) POWER SAVE On/Off the power save function DISPLAY FUNCTION Adjust GAMMA value. (NATIVE,GAMMA1.8,GAMMA2.0,GAMMA2.2,GAMMA2.4, GAMMA2.6,DICOM,VIDEO) OVER SCAN Adjust the displayed size. (0~8) IMAGE SETTING Change the image setting (Mode 1,2,3,4,5) for different ambient light environments. ZOOM / PAN Enlarge the image and pan the screen. FREEZE FRAME Keep still the image (6): Not available for DVI and SDI input sources Setup LANGUAGE Change the OSD language. (8 languages) BACKGROUND Set the Background color RS-232 BAUDRATE Change RS232 BAUDRATE (115200,38400,19200,9600) RS-232 ADDRESS Set the RS232 Address.(Range : 1~255) OSD COLOR Adjust the OSD background from white opaque to half translucent. OSD POSITION Change the OSD position OSD TIMEOUT Adjust time until the OSD Menu will disappear after adjusting the menu. (5, 10, 20, 30, 60, 90, 120, 180, 240 seconds) RESTORE SETTINGS Changes the all OSD value to factory outgoing status. AUTO SOURCE SELECT Enable or disable auto source select. USER NAME ENTRY Register user name. It appears on LOGO when powered on. PIP LAYOUT Change the OSD layout. (Single, PIP, PBP1, PBP2) SOURCE 1 Change the primary source. SOURCE 2 Change the secondary source. SIZE Adjust PIP size. (Small,Large) POSITION Change the PIP position. (9 positions) TOGGLE Swaps the position of the Primary and Secondary images. OSD functions description Menus Function Descriptions BRIGHTNESS Setting the brightness too high or too low will decrease the amount of visible information. CONTRAST Setting the Contrast too high or too low will cause loss of some grayscales. FREQUENCY Do not adjust freely. It will adjust fine state automatically after auto adjustment. When frequency value is wrong, the image has the wrong horizontal size or contains noise. PHASE Do not adjust freely. It will adjust fine state automatically after auto adjustment. BACKLIGHT Setting the backlight too low will cause dark image and too high will decrease the backlight lifetim...

Scarica la tua

Per scaricare, digitare 2 cifre :