valutazioni - 5, GPA: 4.4 ( )

Produttore : Delfield File Size : 539.03 kb File Nome : Lingua di insegnamento:

After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs. The setting of “4” should be correct for home or office refrigerator use. NOTE: ■ If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start. > Use of the Ice Cube Trays • For your ice requirements, fill approximately 3/4 of the tray after washing it. • To release the ice cubes, hold the tray upside down and twist slightly at both ends until the pieces of ice fall. CARE AND MAINTENANCE > Defrosting Your Refrigerator Defrost the refrigerator when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick. Set the thermostat dial to "OFF’. Remove frozen or perishable foods. Insert drip tray below the freezer compartment only for defrosting (as shown below). Defrosting usually takes a few hours. After defrosting, empty water from drip tray and return the thermostat dial to the desired position. To defrost quickly remove all foods from the refrigerator and leave the door open. Never use a knife or other metal instrument to scrape ice/frost from the evaporator. (Model 441YW only) 8 > Changing the Reversible Door This refrigerator has been built with the door hinges on the right. If you wish to change the opening direction, follow the instruction below: • Unplug the refrigerator from its electrical outlet. • Empty everything in the refrigerator, including shelves, food, etc. 1. Remove the hinge cover on the right top of the cabinet. 2. Remove the two screws (using a ratchet tool with a 8MM socket) that hold the top hinge to the cabinet. Keep these screws for later use. 3. Lift the top hinge straight up to free the pin from the socket on the top of the door. 4. Lift the door and place it on a padded surface to prevent scratching it. 5. Remove the plug buttons from the upper left holes as illustrated and transfer them to the uncovered holes at the right side. Be sure to press the plug buttons firmly into the holes. 6. Lay the cabinet on its side down on the floor. Remove the two screws that hold the bottom hinge to the cabinet using a 10MM socket. Keep these screws and washers for later use. 9 7. Insert the bottom hinge at the left side using the two screws previously removed in step 6. NOTE: Do not tighten screws. 8. Stand the cabinet. 9. Replace the door making sure the bottom socket enters the bottom hinge pin. Be sure washers are in place. 10. While holding the door in the closed position, secure the top hinge at the left side using the two screws previously removed at the beginning in step 2. Do not tighten the screws until the top of the door is leveled with the top cabinet. 11. Replace the hinge cover. 12. Tools required: -8MM & 10MM socket-ratchet -Putty knife or thin-blade screwdriver 10 >■ Cleaning Your Refrigerator • Turn the temperature control to "OFF’, unplug the refrigera...

Scarica la tua

Per scaricare, digitare 2 cifre :