valutazioni - 2, GPA: 4 ( )

Produttore : Delfield File Size : 197.37 kb File Nome : d5bdd614-be8e-4f08-8888-e1eac1817fd2.pdf Lingua di insegnamento:

to Wall Allow 25" minimum clearance for a full 130. door swing. Allow 15" for pan removal. for a 90. door swing, allow 4" minimum clearance for professional models. If the 90. doorstop position is used, pan access is maintained but pan removal is restricted. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. ZIF360NXRH, Freezer Handle on the left side, the door swings left to right. ZIF360NXLH, Freezer Handle on the right side, the door swings right to left. Caution These units are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required. The water and electrical supply must be located as shown. The finished cutout width must be 35-1/2". Note: The case trim overlaps cabinets at the top and sides. Frameless cabinets may require filler strips to prevent interference with cabinet door swing. The opening width must allow for filler strips. Listed by Underwriters Laboratories Specification Created 6/08 110153 ZIF360NX GE Monogram® 36" Built-In Custom All-Freezer Dimensions and Installation Information Cutout and Clearances for Multiple Product Installations For a complete food storage center, install a Monogram All-Refrigerator and All Freezer side-by-side. For even more capacity, install two refrigerators or two freezers. If you are installing two units, side by side, the installation space must be 71-1/2" wide. Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. • The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for Multiple Single Door Installations In a side-by-side installation of a left and right door swing product, the inside trims touch at the front, with a 1" clearance between the units at the rear. Order ZUG2 Unified Grille Panel 5" Kit for one continuous grille panel using a 1/4" framed or 3/4" overlay custom panel. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Clearances for two products installed side-by-side with right and left side hinges together Allow 5" minimum between the two products to prevent one door from striking the other. Use the WX14X99 adjustable door stop to reduce the factory set 130. door swing and to allow pan removal. NOTE: A unified grille panel kit will NOT fit this installation. Listed by Underwriters Laboratories Specification Created 6/08 110153 ZIF360NX GE Monogram® 36" Built-In Custom All-Freezer Dimensions and Installation Information All-Refrigerator, 5/16" All-Freezer 1/4" Framed Trim Door/ Reveal Panel Drawer If you choose to install framed panels, they must be cut to the dimensions s...

Scarica la tua

Per scaricare, digitare 2 cifre :