valutazioni - 2, GPA: 4.5 ( )

Produttore : Avanti File Size : 190.07 kb File Nome : f9d8e99f-eee9-de64-3966-2616d174c8e7.pdf Lingua di insegnamento:

35-1/2" Min. for a semi-flush installation. Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. See installation examples on the following page. R Listed by Underwriters Laboratories *Shipped at 84" installation height. Can be adjusted to 83-1/2" or 84-1/2" with Grille Panel Kits. For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000. Side-By-Side Installation of Freezer and Refrigerator 2-1/275" From Floorto Bottomof Electrical Area84-1/2" max83-1/2" minFinishedOpening*Finished WidthElectrical 553-1/224-3/4" TotalDepthWater SupplyWall View65628-1/226FreezerRefrigerator 461Dia636" 84" 24-3/4" 36" For a complete food storage center, install a Monogram Freezer and Refrigerator side-by-side. For even more capacity, install two refrigerators and/or two freezers. • Order ZUGSS Unified Grille Panel Kit for one continuous stainless steel grille panel. • The electrical and water locations must be located as shown for either type of installation. A separate 115V, 60Hz., 20 amp power supply is recommended for each product. *72" min. for a flush installation 71-1/2" min. for a semi-flush installation Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000. R Listed by Underwriters Laboratories Monogram.“ ZIFS36NM – GE Monogram 36" Built-In Stainless Steel All-Freezer Installation at End of Run 461Dia13 37" 1/2" ThickSide Panels978Dia3136"Finished Dim. Roughed-In Dim. 461Dia15CabinetRefrigeratorCabinet Refrigerator Door Note: 1/2" thick side panels shown. Side panels can be any thickness. Add side panel thickness to outside trim width (36" or 72" for two models) to calculate the rough-in dimension. The leading (front) edge must be finished to match surrounding cabinetry. Refrigerator or Freezer 461Dia11 73" 1/2" ThickSide Panels461Dia1772"Finished Dim. Rough-In Dim. Refrigerator and Freezer installed side-by-side NOTE: 1/4" thick side panels can be insertedinto the case trim, making the rough-in thesame as the outside trim width: 36”.Refrigerator or Freezer1/4" ThickSide Panels35-1/2"Finished Dim. 36"Rough-In Dim. CabinetRefrigerator doorRefrigeratorCabinet Installation between base and wall cabinets NOTE: 1/4" thick side panels can be insertedinto the case trim, making the rough-in thesame as the outside trim width: 36”.Refrigerator or Freezer1/4" ThickSide Panels35-1/2"Finished Dim. 36"Rough-In Dim. CabinetRefrigerator doorRefrigeratorCabinet NOTE: 1/4" thick side panels can be insertedinto the case trim, making the rough-in thesame as the outside trim width: 36”.Refrigerator or Freezer1/4" ThickSide Panels35-1/2"F...

Scarica la tua

Per scaricare, digitare 2 cifre :