valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
16. SAFETY CHECK - After servicing the unit ask the customer service for a safety check. 17. OVERLOAD - To avoid fire and electric shock do not overload wall outlets and convenience receptacles. 18. ELECTROSTATIC DISCHARGE - Disconnect from mains power supply and remove batteries if unit malfunctions. Reconnect after a short time. DESCRIPTION AND CONTROLS 1. POWER button 2. POWER LED 3. LIFT button 4. TURNTABLE 5. 45RPM insert 6. TONE ARM REST & LOOK 7. TONE ARM WITH STYLUS 8. CUE LEVER 9. SPEED SELECTOR SWITCH 10. AC POWER CORD 11. AUDIO OUT jacks MAINS POWER SUPPLY Plug the AC power cord (10) into a 230V ~ 50Hz wall outlet. Warnings: • Before connecting to mains power supply ensure that the data corresponds with the rating plate (230V ~ 50Hz). • Do not touch the plug with wet hands. • During longer periods of non-use (vacancy etc.) please disconnect from mains power supply. • To avoid damage and the risk of fire and electric shock do not pull the cable when disconnecting from the mains power supply, always take hold of the plug. 7 11 10 6 2 4 3 5 1 9 8 10. 11. SETTING A SAFE VOLUME LEVEL • If you continually listen to loud music, your hearing gradually adapts to it and gives you the impression that the volume is lower. • What seems normal to you can actually be damaging. • To protect yourself from this, set the volume to a low level. • Increase the volume slowly. • Damage to your hearing can be extensive and cannot be reversed. • If you notice a problem with your ears, please consult a doctor. OPERATION Press POWER (1) to switch the turntable on, press again to switch off; the POWER LED (2) lights up in ON mode. Remove the stylus protection (7) from the tone arm. Be sure the tone arm is detached from tone arm rest before operation and secured again afterwards. 1. Press the POWER button (1) to switch the unit ON. 2. Set the speed selector (9) to the proper position depending on the record to be played 3. Place the record on the turntable. Use the supplied 45rpm insert (5), if necessary. 4. Set the cue lever (8) to up position to lift the tone arm from the tone arm rest. 5. Gently place the tone arm stylus (7) over the desired position on the record. The turntable will start rotating. 6. Set the cue lever (8) to down position to release. The stylus will gently settle on the record. 7. Adjust the volume controls on your stereo system for the desired volume level. 8. At the end of the record the tone arm will return to its rest and the turntable will stop rotating. You can stop the turntable at any time by pressing the LIFT button (3); the tone arm stylus (3) will return to the tone arm rest. IMPORTANT NOTES • Do not touch tone arm or head shell when it is returning to the tone arm rest. • Do not return the tone arm manually to the tone arm rest, only press the LIFT button (3). • Engage the tone arm lock to avoid accidental stylus damage. • Always clean records for a long life span of the stylus. • The stylus may need replacing after long use. STYLUS (NEEDLE) REPLACEMENT 1. Lift the tone arm stylus (7). 2. To remove the old stylus, pull out the stylus assembly and hold the head shell with the other hand. 3. Install the new stylus by pushing it gently onto the cartridge (hold by the edge to prevent damage to the stylus) until it clicks into place. CARE AND MAINTENANCE 1. Press POWER (1) to turn the unit off after use and before cleaning. 2. Clean the unit with a soft and clean cloth moistened with lukewarm water. 3. Do not open the casing and repair by yourself. Always refer repairs to qualified service personnel. 4. To reduce the risk of fire or electric shock do not expose this unit to rain or moisture. Do not block ventilation holes. 5. No open flames, such as lighted candles, are to be placed on the unit. 6. Do not place the unit in closed book cases or racks without proper ventilation. SPECIFICATIONS Power supply : AC 230V ~ 50Hz Power consumption : 5W Speed settings : 33 / 45 / 78 rpm Weight : 1.6 kg Dimensions : 35 x 36 x 10 cm SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. 12. 13. MESURES DE SECURITE 1. LISEZ CES INSTRUCTIONS - Toutes les instructions de securite et d’utilisation doivent etres lues avant de faire fonctionner l’appareil. 2. CONSERVER LES INSTRUCTIONS - Les mesures de securite et de fonctionnement doivent etre conservees pour references ulterieures. 3. RESPECTER TOUS LES AVERTISSEMENTS - Tous les avertissements sur l’appareil et dans le mode d’emploi doivent etre respectes. 4. SUIVRE LES INSTRUCTIONS - Toutes les instructions de fonctionnement doivent etre suivies. 5. EAU ET HUMIDITE - L’appareil ne doit pas etre utilise a proximite de l’eau, par exemple, pres d’une baignoire, d’une bassine, d’un evier, d’une lessiveuse, d’une piscine ou dans un sous-sol humide. 6. VENTILATION - Les ouvertures de l’appareil permettent une bonne ventilation, elles sont necessaires pour un bon fonctionnement de l’appareil et pour empecher les surchauffes. L’appareil doit etre place afin que son...