valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
Example: To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0. After listening, press POWER 6STANDBY/ON to turn the power off. NOTE •Do not use irregular shape CDs (example: heart- shaped, octagonal ones). It may result in malfunctions. •Do not place more than one disc in the disc compartment. •Do not try to open the disc compartment during play. •Do not touch the lens. Doing so may cause malfunctions. • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. •Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. •Do not load an unrecorded CD-R/RW disc. It will take over 30 seconds to read the disc. The disc may be damaged if you try to open the disc compartment while reading the disc. PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, hold down sSTOP/SET/ CLEAR* until “M” flashes in the display. The program number, “P-01” is also displayed. * or sSTOP on the remote control 2 Press for gto select a track, then press sto store it. Selected track number Total playing time of Next program number the selected tracks Pressing the numbered buttons 0-9 and +10 on the remote control selects and stores the track at the same time. 3 Repeat step 2 to program other tracks. 4 Hold down sto finish the program. Total number and total playing time of the selected tracks are displayed. Total playing time of the selected tracks Total number of the selected tracks Pressing efinishes the program and starts programmed play. To check the program, press for g. To clear the program, press sonce in stop mode so that “M” disappears in the display. To change the programmed tracks, clear the program and repeat all the steps again. NOTE The total playing time of the selected tracks will be displayed as “ ”: -When it exceeds “99:59”. -When a track number 31 or higher is selected. REPEAT, RANDOM PLAY A single track or all tracks can be played repeatedly, and all the tracks randomly. Random play can be repeated as well. Press REPEAT/MODE/SLEEP* repeatedly. The mode changes as follows: : Repeats a single track. Select a track with f or g. : Repeats all the tracks. RANDOM: Plays all the tracks randomly. RANDOM and : Plays all the tracks repeatedly in random order. To cancel, press the button repeatedly so that and/ or RANDOM disappears. * or REPEAT on the remote control NOTE •During random play, you cannot skip back to the previous track with f. •When selecting a track with the numbered buttons, random play is canceled. •During programmed play, you cannot select RANDOM and . ENGLISH 9 TAPE OPERATIONC •Use Type I (normal) tapes only. • The unit plays (records on) the side facing up. PLAYBACK 1 Press TAPE. The power is turned on. 2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing up and the exposed side facing forward. PUSH EJECT Press PUSH EJECT to close. 3 Press ePLAY/PAUSE to start playback. Tape counter To set the tape counter to “0000” Press sin stop mode. The counter is also set to “0000” when opening the cassette holder. sSTOP/SET/CLEAR* – Stops play. * or sSTOP on the remote control ePLAY/PAUSE – Pauses play. During pause mode, the tape counter flashes. To resume play, press again. f/g– Rewinds/ fast forwards. To stop the winding, press s. After listening, press POWER 6STANDBY/ON to turn the power off. RECORDING 1 Insert a tape with the side to be recorded on facing up and the exposed side facing forward. 2 Get ready to record from the source. To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO BAND and tune to a station. 3 Press wREC. The unit enters recording pause mode and “REC” flashes slowly in the display. 4 Press eto start recording. “REC” lights up in the display. When the selected function is CD, CD play and recording starts simultaneously. To record only the selected tracks of a CD 1 Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks. 2 Press w. 3 Press e. To stop recording, press s. To pause recording (only when the source is RADIO), press e. During recording pause mode, “REC” flashes slowly. To resume, press it again. To erase recording, press TAPE and start recording (press wthen e). After recording, press POWER 6STANDBY/ON to turn the power off. 10 ENGLISH SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. 1 Hold down REPEAT/MODE/SLEEP* until “SLEEP” flashes in the display. * or MODE on the remote control 2 Within 4 seconds, press for gto specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps. Specified time While the sleep timer works, “SLEEP” is displayed. To check the time remaining until the power is turned off Repeat step 1 shown above. The remaining time is disp...
Questo manuale è adatto anche per i modelli :Stereo - CSD-FD99 (293.85 kb)